Measurement Units - ACU-RITE 01010 Instruction Manual

Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the "▲" or "▼" buttons until
"SET UNITS?" is displayed on the
Selectable Category part of the display unit.
2. Press the "SET" button to set the unit
preference.
3. Press the "▲" or "▼" to select "STAND" for
standard or "METRIC" for metric units.
4. Press the "SET" button to confirm your selection.
5. Next, you will see "WIND MPH". Press the
"▲" or "▼" to select MPH, KPH, or KNOTS
for wind speed units.
6. Press the "SET" button to confirm your selection.
Units are now set.
10