Measurement Units; Set Language - ACU-RITE 1525 Instruction Manual

Select Measurement Units
To select between standard units (mph, ºF, etc.) or
metric units (kph, ºC, etc.):
1. Press the "▲" or "▼" buttons until "SET UNITS?"
is displayed on the Selectable Category part of
the display unit.
2. Press the " " button to set the unit preference.
3. Press the "▲" or "▼" to select "STAND" for
standard or "METRIC" for metric units.
4. Press the " " button to confirm your selection.
5. Next, you will see "WIND MPH". Press the
"▲" or "▼" to select MPH, KPH, or KNOTS
for wind speed units.
6. Press the " " button to confirm your selection.
Units are now set.

Set Language

To select between English (default) or Spanish for the display unit language:
1. Press the "▲" or "▼" buttons until "SET LANG?" is displayed on the
Selectable Category part of the display unit.
2. Press the " " button to set the language preference.
3. Press the "▲" or "▼" to select the desired language.
4. Press the " " button to confirm your selection.
Language is now set.
Note: Display unit reverts to English language when display unit runs out of
power or is reset.
10