Optical Drive; Inserting An Optical Disc - HP Compaq NX9600 Hardware And Software Manual

Drives

Optical Drive

Ä
CAUTION: To avoid playback distortion or damage to optical media,
stop the CD or DVD and exit media software before inserting or
removing an optical drive.

Inserting an Optical Disc

1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release
the media tray, and then pull the tray outward until it is
fully extended 2.
3. Position a CD or one-sided DVD over the tray, label side up.
4. Gently press the center of the disc onto the tray spindle 3
until the disc snaps into place. Handle the disc by the edges,
not the flat surfaces. (If the media tray is not fully extended,
tilt the disc to position it over the tray spindle, and then press
it down into position.)
5. Close the media tray 4.
7–10 Hardware and Software Guide