HP Notebook Series Hardware Manual

Notebook series
Hide thumbs Also See for Notebook Series:
Table of Contents

Advertisement

Hardware Guide
HP Notebook Series
Document Part Number: 355386-001
November 2003
This guide explains how to identify and use notebook hardware
features, including connectors for external devices. It also
includes power and environmental specifications, which might
be helpful when traveling with the notebook.

Advertisement

Table of Contents
loading

Summary of Contents for HP Notebook Series

  • Page 1 Hardware Guide HP Notebook Series Document Part Number: 355386-001 November 2003 This guide explains how to identify and use notebook hardware features, including connectors for external devices. It also includes power and environmental specifications, which might be helpful when traveling with the notebook.
  • Page 2 Thank you for purchasing this Factory Service Manual CD/DVD from servicemanuals4u.com. Please check out our eBay auctions for more great deals on Factory Service Manuals: servicemanuals4u...
  • Page 3 The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
  • Page 4: Table Of Contents

    Contents 1 Hardware Components Identifying Parts of the Notebook ....1–1 Display ........1–1 TouchPad .
  • Page 5 Contents Hotkey Procedures......2–8 Hotkey Commands ......2–8 Using Quick Launch Buttons .
  • Page 6 Removing a Diskette (Select Models) ... 4–15 Installing an Optional HP USB Digital Drive (Select Models) ....... 4–16 Installing an Optional SD Memory Card.
  • Page 7 Contents 6 External Device Connections Connecting a Standard Device ..... 6–1 Connecting a USB Device ......6–2 Using a USB Device .
  • Page 8 Contents Using Digital Media Cards (Select Models) ..8–6 Inserting an Optional Digital Media Card ..8–7 Removing an Optional Digital Media Card..8–9 Disabling an Optional Digital Media Card .
  • Page 9: Hardware Components

    Hardware Components Identifying Parts of the Notebook Components included with the notebook vary by geographical region and by model. This guide includes illustrations for the different models and features. In each section, refer to the illustrations that closely match your notebook. The illustrations in Chapter 1 identify the standard external features included in most notebook models.
  • Page 10 Hardware Components Component Description Display release latch Opens the notebook. 1–2 Hardware Guide...
  • Page 11: Touchpad

    Hardware Components TouchPad Component Description TouchPad* Moves the pointer and selects or activates items on the screen. Left and right TouchPad Function like the left and right buttons buttons of an external mouse. TouchPad scroll pad Functions like the wheel of an external mouse for scrolling up and down.
  • Page 12 Hardware Components Component Description TouchPad* Moves the pointer and selects or activates items on the screen. Left and right TouchPad Function like the left and right buttons buttons on an external mouse. TouchPad on/off button Turns TouchPad on or off. TouchPad light On: TouchPad is enabled.
  • Page 13: Top Components

    Hardware Components Top Components Power Lights Component Description Power button light On: Notebook is turned on. Blinking: Notebook is in Standby. Off: Notebook is off or in Hibernation. Power/Standby light On: Notebook is turned on. Blinking: Notebook is in Standby. Off: Notebook is off or in Hibernation.
  • Page 14 Hardware Components Component Description Power button light On: Notebook is turned on. Blinking: Notebook is in Standby. Off: Notebook is off or in Hibernation. Power/Standby light On: Notebook is turned on. Blinking: Notebook is in Standby. Off: Notebook is off or in Hibernation. Battery light On: Battery pack is charging.
  • Page 15: Keyboard And Drive Lights

    Hardware Components Keyboard and Drive Lights Component Description Caps lock light On: Caps lock is on. Num lock light On: Num lock or the internal keypad is on.* IDE (Integrated Drive On: The internal hard drive or optical Electronics) light; also drive bay is being accessed.
  • Page 16 Hardware Components Component Description Caps lock light On: Caps lock is on. Num lock light On: Num lock or the internal keypad is on.* IDE (Integrated Drive On: The internal hard drive or the Electronics) light; also optical drive bay is being accessed. referred to as hard drive/optical drive activity light...
  • Page 17: Power And Volume Controls

    Hardware Components Power and Volume Controls Component Description Power button* When the notebook is: ■ Off, press the button to turn on the notebook. ■ On, briefly press the button to initiate Hibernation. ■ In Standby, briefly press the button to resume from Standby.
  • Page 18 Hardware Components Component Description Power button* When the notebook is: ■ Off, press the button to turn on the notebook. ■ On, briefly press the button to initiate Hibernation. ■ In Standby, briefly press the button to resume from Standby. ■...
  • Page 19: Quick Launch Buttons And Keyboard Keys

    Hardware Components Quick Launch Buttons and Keyboard Keys Component Description Quick Launch buttons: From left to right: 3 programmable Picture, Media, and Internet buttons enable you to access the My Pictures folder, a multimedia application, and the Internet with one keystroke. The icon on each button represents the default destination.
  • Page 20 Hardware Components Wireless On/Off button Enables wireless functionality, but does not create a wireless connection. ✎ To set up and complete a wireless connection, additional hardware and software might be required. Windows logo key Displays Windows Start menu. Windows Applications key Displays shortcut menu for any highlighted items.
  • Page 21: Wireless On/Off Button And Application Keys

    Hardware Components Wireless On/Off Button and Application Keys Component Description Wireless On/Off button Enables wireless functionality, but does not create a wireless connection. ✎ To set up and complete a wireless connection, additional hardware and software might be required. Windows logo key Displays Windows Start menu.
  • Page 22: Function And Keypad Keys

    Hardware Components Function and Keypad Keys Component Description Fn key Combines with the function keys to perform additional system and application tasks. For example, pressing Fn+F8 increases screen brightness. Function keys (11)* Perform system and application tasks. When combined with the Fn key, function keys F1 through F12 perform additional tasks as hotkeys.
  • Page 23 Hardware Components Component Description Fn key Combines with the function keys to perform additional system and application tasks. For example, pressing Fn+F8 increases screen brightness. Function keys (11)* Perform system and application tasks. When combined with the Fn key, function keys F1 through F12 perform additional tasks as hotkeys.
  • Page 24: Front Components

    Hardware Components Front Components Component Description Display release latch Opens the notebook. Power/Standby light On: Notebook is turned on. Blinking: Notebook is in Standby. Off: Notebook is off or in Hibernation. IDE (Integrated Drive On: The internal hard drive or optical Electronics) light;...
  • Page 25 Hardware Components Battery light On: Battery pack is charging. Blinking: Battery pack has reached a low-battery condition. Off: AC power is applied, with battery pack either fully charged or not installed, or no AC power is applied. Stereo speakers (2) Produce stereo sound.
  • Page 26 Hardware Components Component Description Stereo speakers (2) Produce stereo sound. Power/Standby light On: Notebook is turned on. Blinking: Notebook is in Standby. Off: Notebook is off or in Hibernation. Display release latch Opens the notebook. IDE (Integrated Drive On: The internal hard drive or optical Electronics) light;...
  • Page 27 Hardware Components Battery light On: Battery pack is charging. Blinking: Battery pack has reached a low-battery condition. Off: AC power is applied, with battery pack either fully charged or not installed, or no AC power is applied. Wireless On/Off button Enables wireless functionality, but does not create a wireless connection.
  • Page 28: Rear Components

    Hardware Components Rear Components Component Description Power connector Connects an AC adapter. Exhaust vent Allows airflow to cool internal components. Additional vents are on the bottom of the notebook. Ä To prevent overheating, do not obstruct the vent. Do not allow a hard surface, such as an adjoining printer, or a soft surface, such as bedding or...
  • Page 29 Hardware Components Component Description Power connector Connects an AC adapter. Exhaust vent Allows airflow to cool internal components. Additional vents are on the bottom of the notebook. Ä To prevent overheating, do not obstruct the vent. Do not allow a hard surface, such as an adjoining printer, or a soft surface, such as bedding or clothing, to block airflow.
  • Page 30: Left-Side Components

    Hardware Components Left-Side Components Component Description Security cable slot Attaches an optional security cable to the notebook. ✎ The purpose of security solutions is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen. 5-in-1 Digital Media slot and Supports 5 optional digital media light (select models)
  • Page 31 Connect optional USB device, such as printers. Three drive configurations: Digital Bay: Supports optional optional Digital Bay, optional pocket-sized HP USB Digital Drive. diskette drive, no drive Diskette drive: Supports standard 1.4-MB diskette. No drive: No drive is installed. ■...
  • Page 32 Hardware Components Component Description Security cable slot Attaches an optional security cable to the notebook. ✎ The purpose of security solutions is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen. PC Card slot (1 or 2 slots, Supports an optional Type I or Type II select models) 32-bit (CardBus) or 16-bit PC Card.
  • Page 33 Connect optional USB devices, such as printers. Three drive configurations: Digital Bay: Supports optional optional Digital Bay, optional pocket-sized HP USB Digital Drive. diskette drive, no drive Diskette drive: Supports standard 1.4-MB diskette. No drive: No drive is installed. ■...
  • Page 34: Right-Side Components

    Hardware Components Right-Side Components Component Description Audio-out headphone jack Connects an optional headphone, a headset, or powered stereo speakers. Also connects the audio function of an audio/video device, such as a television or VCR. Audio-in microphone jack Connects an optional external microphone.
  • Page 35 Infrared port Provides wireless communication (select models) between the notebook and an optional IrDA-compliant device. Expansion port Connects an optional HP Notebook Expansion Base. RJ-45 network jack Connects an optional network cable. S-Video-out jack Connects an optional S-Video device, such as a television, VCR, camcorder, overhead projector, or video capture card.
  • Page 36 Hardware Components Component Description Wireless on/off light On: Wireless functionality is enabled, but wireless connection might not be configured. Off: No wireless device is active. Volume buttons (3) and Decrease, mute, and increase the system audio mute light volume: ■ To decrease volume, use left button.
  • Page 37 Infrared port Provides wireless communication (select models) between the notebook and an optional IrDA-compliant device. Expansion port Connects an optional HP Notebook Expansion Base. RJ-45 network jack Connects an optional network cable. S-Video-out jack Connects an optional S-Video device, such as a television, VCR, camcorder, overhead projector, or video capture card.
  • Page 38: Bottom Components

    Hardware Components Bottom Components Component Description Battery release latch Releases the battery pack from the battery bay. Battery bay Holds the battery pack. Exhaust vents Allow airflow to cool internal components. Ä To prevent overheating, do not obstruct the vent. Do not allow a hard surface, such as an adjoining printer, or a soft surface, such as bedding or...
  • Page 39 Hardware Components Component Description Battery release latch Releases the battery pack from the battery bay. Battery bay Holds the battery pack. (Battery shipment and type vary by model.) Exhaust vents Allow airflow to cool internal components. Ä To prevent overheating, do not obstruct the vent.
  • Page 40: Labels

    Hardware Components Labels The labels affixed to the bottom of the notebook and to the inside of the battery compartment provide information you might need when troubleshooting system problems or traveling abroad with the notebook. ■ The Service Tag label affixed to the bottom of the notebook contains the product name, product number (P/N), and serial number (S/N).
  • Page 41: Additional Standard Components

    Hardware Components Additional Standard Components The components included with the notebook vary by geographic region and by model. The following illustrations and tables identify the standard external components included with most notebook models. Documentation Library CD Your notebook Documentation Library CD includes the following guides: ■...
  • Page 42: Cords, Cables And Adapters

    Hardware Components Cords, Cables and Adapters Component Description Power cord* Connects the AC adapter to an AC electrical outlet. AC adapter** Converts AC power to DC power. Modem cables Connects the modem to an (select models)* RJ-11 telephone jack or to a country-specific modem adapter.
  • Page 43: Touchpad And Keyboard

    TouchPad and Keyboard Using the TouchPad The TouchPad duplicates the functions of an optional external mouse. Hardware Guide 2–1...
  • Page 44 TouchPad and Keyboard ■ To move the pointer, slide your finger across the TouchPad surface 1 in the direction you want to move the cursor. ✎ If the cursor continues to move after you take your finger off the TouchPad, wait a few seconds for the cursor to stop moving.
  • Page 45 TouchPad and Keyboard ■ To move the pointer, slide your finger across the TouchPad surface 1 in the direction you want to move the cursor. ✎ If the cursor continues to move after you take your finger off the TouchPad, wait a few seconds for the cursor to stop moving.
  • Page 46: Setting Touchpad Preferences

    TouchPad and Keyboard Setting TouchPad Preferences The TouchPad is supported by the mouse software in the operating system. To access the Mouse Properties window, select Start > Control Panel > Printers and Other Hardware > Mouse. Among the settings you can select are: ■...
  • Page 47: Using The Hotkeys

    TouchPad and Keyboard Using the Hotkeys ✎ In this guide, the function keys are capitalized ( ). The Fn, F5 function keys on your keyboard might be lowercase ( fn, f5 key 1 and one of Hotkeys are preset combinations of the the function keys 2.
  • Page 48 TouchPad and Keyboard Identifying hotkeys 2–6 Hardware Guide...
  • Page 49: Hotkey Quick Reference

    TouchPad and Keyboard Hotkey Quick Reference The following table identifies the hotkey functions set at the factory. Default Function Hotkey Open Help and Support Center. Fn+F1 Not used. Fn+F2 Open Microsoft Internet Explorer. Fn+F3 Switch display image. Fn+F4 Initiate Standby. Fn+F5 Initiate QuickLock.
  • Page 50: Hotkey Procedures

    Open Help and Support Center (Fn+F1) The Help and Support Center provides a comprehensive online resource tool for contacting an HP support specialist, for downloading the latest software driver updates and product information, and for learning more about using and maintaining your notebook.
  • Page 51 TouchPad and Keyboard Initiate Standby (Fn+F5) hotkey is set by default to initiate Standby. Fn+F5 ■ When the notebook is on, press the hotkey to initiate Fn+F5 Standby. When Standby is initiated, your work is saved in random access memory (RAM), the screen is cleared, and power is conserved.
  • Page 52 TouchPad and Keyboard Decrease Screen Brightness (Fn+F7) Press the hotkey to decrease the brightness of the notebook Fn+F7 screen. Decreasing brightness conserves power. Increase Screen Brightness (Fn+F8) Press the hotkey to increase the brightness of the Fn+F8 notebook screen. Play, Pause or Resume an Audio CD or DVD (Fn+F9) If an audio CD or DVD is inserted into the optical drive, press hotkey to play it.
  • Page 53: Using Quick Launch Buttons

    TouchPad and Keyboard Using Quick Launch Buttons The 3 Quick Launch buttons enable you to use a single keystroke to access default software applications or the Internet. Identifying the Quick Launch buttons Button Name Default Assignment Picture Opens My Pictures folder and then launches the default photo and imaging software application.
  • Page 54: Reprogramming The Quick Launch Buttons

    TouchPad and Keyboard Reprogramming the Quick Launch Buttons Your notebook Quick Launch buttons can be assigned to an Internet location, a network destination, a software application, or a data file. For example, a Quick Launch button can be assigned to open your Internet browser to a favorite Web page or to open an application, such as Microsoft Word, or even a document, such as an Excel worksheet.
  • Page 55: Keypad

    TouchPad and Keyboard Keypad The notebook has an internal numeric keypad and supports an optional external numeric keypad or an optional external keyboard that includes a numeric keypad. Using the Keypad The keypad consists of 15 keys that can be used like the keys on an external keypad.
  • Page 56 TouchPad and Keyboard Identifying the keypad keys 2–14 Hardware Guide...
  • Page 57 ✎ The keypad cannot be turned on while an optional external keypad is connected to the USB connector on an optional HP Notebook Expansion Base. Identifying the keys and the num lock light num lock Hardware Guide...
  • Page 58 TouchPad and Keyboard Identifying the keys and the num lock light num lock 2–16 Hardware Guide...
  • Page 59 TouchPad and Keyboard Switching Key Functions on the Keypad You can temporarily switch the functions of keys on the keypad between the standard function and the keypad function by using key or the key combination. Fn+shift ■ To make a standard key function as a keypad key (when the keypad is turned off), press and hold the key while pressing the keypad key.
  • Page 60: Battery Packs

    Battery Packs Running the Notebook on Battery Power The notebook switches between AC power and battery power according to the availability of an external AC power source, always preferring AC power. If the notebook contains a charged battery pack and is running on external AC power, the notebook will switch to battery power only if the AC adapter is disconnected from the notebook.
  • Page 61: Inserting Or Removing The Battery Pack

    Battery Packs Inserting or Removing the Battery Pack Ä CAUTION: When removing a battery pack that is the only power source, initiate Hibernation or turn off the notebook to prevent loss of work. To insert or remove a battery pack: ■...
  • Page 62 Battery Packs Inserting or removing the battery pack Hardware Guide 3–3...
  • Page 63: Charging A Battery Pack

    Battery Packs Charging a Battery Pack The battery pack automatically charges when the notebook is connected to external power through an AC adapter. The battery pack charges whether the notebook is powered off or in use, but it charges faster when the notebook is powered off. When the notebook is in use, charging will take longer, depending on system activity.
  • Page 64: Obtaining Accurate Charge Information

    Battery Packs Obtaining Accurate Charge Information Charging the battery pack prolongs battery life and increases the accuracy of the battery gauge. When charging the battery: ■ Allow the battery pack to fully discharge before charging it. ■ Charge the battery pack fully. Even a new battery pack can display charge information inaccurately if it has not been charged fully.
  • Page 65: Placing The Power Meter Icon On The Taskbar

    Battery Packs Placing the Power Meter Icon on the Taskbar To place the Power Meter icon on the taskbar, access the Power Options window. » Select the Advanced tab, and then select the Always show icon on the taskbar check box. ✎...
  • Page 66: Verifying Hibernation Settings

    Battery Packs The battery light continues to blink and: ■ If Hibernation is enabled (the default setting) and the notebook is on or in Standby, the system initiates Hibernation and saves system memory to the hard drive. Unsaved work might be lost. ■...
  • Page 67: Calibrating A Battery Pack

    Battery Packs Calibrating a Battery Pack When to Calibrate Even if a battery pack is heavily used, it should not be necessary to calibrate it more than once a month. It is not necessary to calibrate a new battery pack before first use. However, make sure that the battery pack is fully charged, especially if it is the only power source.
  • Page 68: Discharging The Battery Pack

    Battery Packs Discharging the Battery Pack Disabling Hibernation To fully discharge the battery pack, disable Hibernation temporarily. To disable Hibernation: » Select the Power Meter icon on the taskbar or access Power Options > Hibernate, and clear the Enable Hibernate support check box.
  • Page 69: Battery Conservation Procedures And Settings

    Battery Packs Recharging the Battery Pack 1. Connect the notebook to external power and keep the notebook connected until the battery pack is fully recharged and the battery light turns off. ✎ You can use the notebook while the battery pack is recharging, but the battery pack will charge faster if the notebook is turned off.
  • Page 70: Storing A Battery Pack

    Battery Packs ■ Unplug external devices not connected to external power when you are not using them. ■ Stop or remove a PC Card or a digital media card that you are not using. ■ Decreasing screen brightness by pressing saves power.
  • Page 71: Disposing Of A Used Battery Pack

    ■ In Europe, dispose of or recycle battery packs by using the public collection system or by returning them to HP, your authorized HP, or their agents. ■ In other regions, refer to the Worldwide Telephone Numbers...
  • Page 72: Drives

    Drives About Drive Terms Hard drives are for permanent storage of data files and software, such as system files, applications, and drivers. A hard drive is sometimes called a hard disk drive. Optional disk drives (select models) include diskette drives. A diskette drive is sometimes called a floppy disk drive or floppy drive.
  • Page 73 SD (Secure Digital) Memory Card drives for storing and transferring files such as digital pictures, music, video, or large data files. An HP USB Digital Drive can be connected to an optional Digital Bay or to a USB port with the HP USB Digital Drive cable either retracted or extended.
  • Page 74: Caring For Drives And Drive Media

    Drives Caring for Drives and Drive Media Drives and drive media are fragile notebook components that must be handled with care. The following cautions apply to all drives. Cautions that concern specific procedures are included with the procedures. Caring for Drives Ä...
  • Page 75: Caring For Drive Media

    Drives Caring for Drive Media Ä CAUTION: To prevent damage to drive media: ■ Do not open the metal shutter of a diskette or touch the disk within the diskette case. ■ Do not expose a diskette to a strong magnetic field, such as the security field used by a walk-through security device or a handheld security wand.
  • Page 76: Displaying Media Contents

    Drives Displaying Media Contents AutoPlay, sometimes called Autorun, is a feature of the operating system. AutoPlay displays the contents of your media on the screen when you insert a CD or DVD into an optical drive and close the tray. AutoPlay is enabled by default, but can be disabled.
  • Page 77: Adding A Drive To The System

    Some notebook models include an optional diskette drive or an optional HP USB Digital Drive. The HP USB Digital Drive can be connected to one of the USB connectors or to the optional Digital Bay.
  • Page 78: Using The Ide Drive Light

    Drives Using the IDE Drive Light The IDE (Integrated Drive Electronics) light turns on when the internal hard drive or an optical drive is being accessed. The light is also referred to as the hard drive/optical drive activity light. Identifying the IDE drive light Identifying the IDE drive light Hardware Guide 4–7...
  • Page 79: Inserting And Removing Drive Media

    Drives Inserting and Removing Drive Media Ä CAUTION: To avoid playback distortion or damage to optical media, stop the CD or DVD and exit media software before inserting or removing an optical drive. Inserting a CD or DVD 1. Turn on the notebook. 2.
  • Page 80 Drives Inserting a CD or DVD into an optical drive Hardware Guide 4–9...
  • Page 81: Removing A Cd Or Dvd (With Power)

    Drives Removing a CD or DVD (With Power) 1. Turn on the notebook. 2. Press the release button 1 on the drive bezel to release the media tray, and then pull the tray out until it is fully extended 2. 3.
  • Page 82 Drives Removing a CD or DVD from an optical drive when power is available Hardware Guide 4–11...
  • Page 83: Removing A Cd Or Dvd (Without Power)

    Drives Removing a CD or DVD (Without Power) If the notebook is turned off or if no power is available, the release button on the drive will not work. To remove a disc from an optical drive without using the release button: 1.
  • Page 84 Drives Removing a CD or DVD from an optical drive when power is not available Hardware Guide 4–13...
  • Page 85: Inserting A Diskette (Select Models)

    Drives Inserting a Diskette (Select Models) To insert a diskette into a diskette drive, gently slide the diskette, label side up, into the drive until it clicks into place. The media eject button extends when the diskette is correctly inserted. Identifying the media eject button on a diskette drive 4–14 Hardware Guide...
  • Page 86: Removing A Diskette (Select Models)

    Drives Identifying the media eject button on a diskette drive Removing a Diskette (Select Models) To remove a diskette from a diskette drive: 1. Press the media eject button on the drive to eject the diskette. 2. Slide the diskette from the drive. 3.
  • Page 87: Installing An Optional Hp Usb Digital Drive

    Optional HP USB Digital Drives are pocket-sized, SD (Secure Digital) Memory Card drives for storing and transferring files such as digital pictures, music, video, or data files. An HP USB Digital Drive can be connected to the optional Digital Bay or to the USB port.
  • Page 88: Installing An Optional Sd Memory Card

    Drives Installing an Optional SD Memory Card To install an SD Memory Card into the Digital Drive: 1. Remove the cap of the Digital Drive. 2. Insert an SD Memory Card into the SD slot of the Digital Drive. Hardware Guide 4–17...
  • Page 89: Connecting An Optional Digital Drive To The Usb Port

    Drives Connecting an Optional Digital Drive to the USB Port The optional Digital Drive can be connected to the USB port with the USB cable either retracted or extended. To connect the Digital Drive with the USB cable retracted: 1. Ensure that you have installed an SD Memory Card into the Digital Drive.
  • Page 90 Drives Connecting the Digital Drive to the USB port Hardware Guide 4–19...
  • Page 91 Drives To connect the optional Digital Drive with the USB cable extended: 1. Rotate the USB cable until it is fully extended. Extending the USB Cable 4–20 Hardware Guide...
  • Page 92 Drives 2. Insert the connector on the USB cable into the USB port on your notebook. Connecting the extended USB cable to the USB Port Connecting the extended USB cable to the USB Port Hardware Guide 4–21...
  • Page 93: Inserting An Optional Digital Drive Into An Optional Digital Bay

    Drives Inserting an Optional Digital Drive into an Optional Digital Bay To insert an optional Digital Drive into the optional Digital Bay: 1. Ensure that you have installed an SD Memory Card into the Digital Drive. 2. Gently insert the Digital Drive, label side up, into the Digital Bay until the drive clicks into place.
  • Page 94 Drives Inserting the Digital Drive into the Digital Bay Hardware Guide 4–23...
  • Page 95: Removing An Optional Digital Drive From An Optional Digital Bay

    Drives Removing an Optional Digital Drive from an Optional Digital Bay To remove the optional Digital Drive from the optional Digital Bay: 1. Press the Digital Drive release button 1 to eject the Digital Drive. 2. Remove the Digital Drive from the bay 2. Removing the Digital Drive from the Digital Bay 4–24 Hardware Guide...
  • Page 96: Finding Optional Drive Software Information

    Drives Removing the Digital Drive from the Digital Bay Finding Optional Drive Software Information Software you need to play CDs and DVDs is available on the notebook. For more information, refer to the “Multimedia” chapter in the Software Guide on this CD. Hardware Guide 4–25...
  • Page 97: Audio And Video

    Audio and Video Adjusting Volume Volume can be adjusted by using the volume buttons on the notebook or by accessing the volume control software. Volume adjustment is also available within some applications. Using the Volume Buttons To adjust volume using the volume buttons: ■...
  • Page 98: Using The Volume Control Icon

    Audio and Video ■ To decrease volume, press the left volume button 1. ■ To increase volume, press the middle volume button 1. ■ To mute or restore volume, press the right volume button 2. Identifying the volume buttons Using the Volume Control Icon To place the Volume Control icon on the taskbar, select Start >...
  • Page 99: Using The Internal Speakers

    Audio and Video Using the Internal Speakers The internal speakers play stereo sound from applications, the operating system, games, drive media, the Internet, and other sources. ✎ If an external device, such as a headset, is connected to the audio-out jack, sometimes called the line-out jack, the internal speakers are disabled.
  • Page 100: Connecting An Audio Device

    Audio and Video Connecting an Audio Device Identifying Audio Jacks The notebook has 2 audio jacks: ■ The audio-out jack 1, sometimes called the line-out jack, connects a headset, headphones, or external stereo speakers. The audio-out jack is also used to connect the audio functions of an audio/video device such as a television or VCR.
  • Page 101: Using The Microphone Jack

    Audio and Video Identifying audio jacks Using the Microphone Jack Your notebook is equipped with a stereo microphone jack. Using sound recording application software and an external, stereo microphone allows for stereo (dual channel) recordings and stereo playbacks. Using sound recording application software and an external, monoaural microphone allows for only monoaural (single channel) recordings and stereo playbacks.
  • Page 102: Using The Audio-Out Jack

    Audio and Video Using the Audio-Out Jack Å WARNING: To reduce the risk of personal injury, adjust the volume before putting on headphones or a headset. Ä CAUTION: To prevent possible damage to an external device, do not plug a monaural plug into the audio-out jack. When connecting a device to the audio-out jack: ■...
  • Page 103: Connecting An S-Video Device

    Audio and Video Connecting an S-Video Device Connecting the Audio The S-Video-out jack supports video signals only. If you are setting up a configuration that combines audio and video functions, such as playing a DVD movie on your notebook and displaying it on your television screen, you will need a standard 3.5-mm audio cable available from most computer or electronics retailers.
  • Page 104 Audio and Video Identifying the S-Video-out jack Identifying the S-Video-out jack 5–8 Hardware Guide...
  • Page 105: Turning A Video Device On And Off

    Audio and Video Turning a Video Device On and Off When an S-Video device is turned on, an image is displayed. When the device is off, an image is not displayed. To turn on a video device, use one of the following methods: ■...
  • Page 106 Audio and Video To change the color television format: 1. Select Start > Control Panel > Appearance and Themes > Display > Settings. Select the Advanced button and then the ATI Displays tab. 2. Select the TV button, and then select the Format tab. 3.
  • Page 107: External Device Connections

    External Device Connections Connecting a Standard Device The jacks, connectors, and ports described in this guide support standard external devices. ■ For information about which jack, connector, or port to use, refer to the documentation included with the device. ■ For information about installing or loading any software, such as drivers required by the device, refer to the device documentation, the operating system Help files, or the...
  • Page 108: Connecting A Usb Device

    Optional USB hubs can be connected to a USB connector on the notebook or on an optional HP Notebook Expansion Base, or to other USB devices. Hubs can support several USB devices.
  • Page 109: Using A Usb Device

    External Device Connections Identifying the 2 USB connectors on the left side and one USB connector on the right side Using a USB Device USB devices function in the system the same way as comparable non-USB devices do, with one exception: by default, USB devices do not function unless an operating system that supports USB is loaded.
  • Page 110: Linking To An Infrared Device (Select Models)

    External Device Connections Linking to an Infrared Device (Select Models) Some notebook models are IrDA-compliant and can communicate with another infrared-equipped device that is also IrDA-compliant. The IrDA connection speed standard is 4 megabits per second (Mbps). The infrared port supports low-speed connections up to 115 kilobits per second (Kbps) as well as high-speed connections up to 4 Mbps.
  • Page 111: Setting Up An Infrared Transmission

    External Device Connections Linking to an infrared device Setting Up an Infrared Transmission For information about using infrared software, refer to the operating system Help files. To set up infrared devices for optimal transmission: ■ Prepare the infrared ports on both devices for transmission. ✎...
  • Page 112: Avoiding Standby While Using Infrared

    External Device Connections ■ Shield the ports from direct sunlight, flashing incandescent light, and fluorescent light. ■ Be sure that signals from a remote control or other wireless device (such as a cell phone, headphones, or audio device) do not aim at either port. ■...
  • Page 113: Connecting An Optional Cable Lock

    External Device Connections Connecting an Optional Cable Lock ✎ The purpose of security solutions is to act as a deterrent. These solutions do not prevent the product from being mishandled or stolen. To install a security cable lock: 1. Loop the security cable 1 around a secured object. 2.
  • Page 114 External Device Connections Connecting a security lock For more information about other security features of your notebook, refer to the “Security” chapter in the Software Guide on this CD. 6–8 Hardware Guide...
  • Page 115: Modem And Network Connections

    Modem and Network Connections Using the Modem (Select Models) Some notebook models include an RJ-11 telephone jack, modem cable, and a preinstalled V.92 modem. You can connect your modem to a telephone line and communicate throughout the world. You can explore the Internet, send and receive email messages, and use your notebook to send and receive faxes.
  • Page 116 Modem and Network Connections Å WARNING: To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a telephone cable into the RJ-45 network jack. Å WARNING: Connecting the notebook to a digital line can permanently damage the modem.
  • Page 117: Connecting The Modem To An Rj-11 Jack

    Modem and Network Connections Connecting the Modem to an RJ-11 Jack Refer to one of the following illustrations to connect an RJ-11 modem cable. Connecting the RJ-11 modem cable Hardware Guide 7–3...
  • Page 118 Modem and Network Connections Connecting the RJ-11 modem cable 7–4 Hardware Guide...
  • Page 119: Connecting The Modem With An Adapter

    Modem and Network Connections Connecting the Modem with an Adapter Telephone jacks vary by country. To use the modem and the RJ-11 cable outside the country in which you purchased the notebook, you must obtain a country-specific modem adapter. For more details about using your notebook internationally, refer to the Modem and Networking guide on this CD.
  • Page 120: Special Restrictions In Certain Countries

    Modem and Network Connections Connecting a modem cable using a modem adapter Special Restrictions in Certain Countries ■ Many countries impose a blackout period after a modem repeatedly fails to connect to a service provider. The number of failed attempts and the period you must wait before trying again differ from country to country.
  • Page 121: Connecting To A Local Area Network (Lan)

    Modem and Network Connections To change your modem settings: ■ Control Panel. Open Phone and Modem Options in Control Panel to change modem settings by selecting Start > Control Select Phone and Panel > Network and Internet Connections. Modem Options from the left hand panel. On the Modems tab, select Properties to set connection speeds, or on the Dialing Rules tab, select Edit to set dialing options.
  • Page 122 Modem and Network Connections To connect to a LAN: 1. Check that the existing LAN supports Ethernet 10BASE-T/100BASE-TX connections. 2. Plug the purchased network cable into the notebook RJ-45 jack 1. 3. Plug the other end into the LAN network jack 2. 4.
  • Page 123: Turning A Network Connection Off And On

    Modem and Network Connections Connecting an RJ-45 network cable See Windows Help for information about setting up and using LAN connections. Select Start > Help and Support. Contact your network administrator for network information. Turning a Network Connection Off and On To conserve power, turn off a network connection you are not using.
  • Page 124: Making Wireless Network Connections

    Modem and Network Connections Making Wireless Network Connections (Select Models) Some notebook models are equipped with a wireless network device that can connect by radio signals to an 802.11a, 802.11b, or 802.11g wireless local area network (WLAN) and then access computers and other resources on the network (not all available/accessible in all countries).
  • Page 125 Modem and Network Connections Identifying the wireless antenna Å WARNING: Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact during normal operation is minimized.
  • Page 126: Turning Wireless Communication On And Off

    Modem and Network Connections Turning Wireless Communication On and Off Wireless networks and cellular modems are examples of devices that use wireless communication. The use of some devices might be restricted in certain situations or environments, such as when traveling in an airplane. If in doubt, be sure to ask for authorization before turning on your notebook wireless networking.
  • Page 127 Modem and Network Connections Putting the notebook in Standby or Hibernation, or shutting it down, also turns off the wireless function. Pressing the Wireless On/Off button Pressing the Wireless On/Off button Hardware Guide 7–13...
  • Page 128: Connecting To A Wireless Network

    Modem and Network Connections Connecting to a Wireless Network You can connect to an access point that gives you access to a local area network, or you can connect directly to other computers in an “ad hoc” network. Before you can connect your notebook to an existing 802.11a, 802.11b, or 802.11g wireless network, you have to configure the notebook.
  • Page 129: Making Bluetooth Wireless Connections

    Modem and Network Connections Making Bluetooth Wireless Connections (Select Models) If your notebook includes Bluetooth wireless capabilities, you can use it to make short-range radio connections to a wireless personal area network (PAN) and access other Bluetooth-compatible devices, such as other notebooks, cell phones, and printers.
  • Page 130: Hardware Upgrades

    To order notebook hardware or to learn more about upgrades and accessories, visit the HP Web site at http://www.hp.com/support. You can contact an authorized dealer, reseller, or HP service provider by referring to the Worldwide Telephone Numbers booklet (English only) included with the notebook.
  • Page 131: Using Pc Cards

    Hardware Upgrades Using PC Cards An optional PC Card is a credit card–sized accessory designed to conform to the standard specifications of the Personal Computer Memory Card International Association (PCMCIA). The notebook supports both 32-bit (CardBus) and 16-bit PC Cards, which will vary by notebook model.
  • Page 132: Inserting A Pc Card

    Hardware Upgrades Inserting a PC Card Ä CAUTION: To prevent damage to the PC Card connectors, use minimal force when inserting a PC Card into a PC Card slot. 1. Hold the PC Card label-side up with the connectors facing the notebook.
  • Page 133 Hardware Upgrades Inserting a PC Card 8–4 Hardware Guide...
  • Page 134: Stopping And Removing A Pc Card

    Hardware Upgrades Stopping and Removing a PC Card Ä CAUTION: To prevent loss of work or an unresponsive system, stop the PC Card before removing it. ✎ Stopping a PC Card, even if it is not in use, conserves power. 1.
  • Page 135: Using Digital Media Cards (Select Models)

    Hardware Upgrades Removing a PC Card Using Digital Media Cards (Select Models) Optional digital media cards are removable storage devices that provide a convenient method of storing data and sharing it with other devices such as PDAs, cameras, and other memory card-equipped PCs.
  • Page 136: Inserting An Optional Digital Media Card

    Hardware Upgrades Inserting an Optional Digital Media Card Ä CAUTION: To prevent damage to the digital media card connectors, use minimal pressure when inserting a digital media card into a Digital Media slot. To insert a digital media card: 1. Hold the digital media card label-side up (finger-side up for SD cards) with the connectors facing the notebook.
  • Page 137 Hardware Upgrades Inserting a digital media card 8–8 Hardware Guide...
  • Page 138: Removing An Optional Digital Media Card

    Hardware Upgrades Removing an Optional Digital Media Card Ä CAUTION: To prevent loss of work or system lockup, stop the digital media card before removing it. To remove an optional digital media card: 1. Stop the card by closing all files and applications that are using it.
  • Page 139: Disabling An Optional Digital Media Card

    Hardware Upgrades Removing a digital media card Disabling an Optional Digital Media Card A digital media card inserted into the Digital Media slot uses power even when the card is not in use. Disabling the card conserves power. To disable a media card: »...
  • Page 140: Increasing Memory

    Increasing Memory You can increase the amount of RAM (random access memory) in the notebook with an optional memory module approved by HP. The notebook contains 2 memory slots, one of which is accessible for an optional 128-MB, 256-MB, 512-MB, or 1024-MB memory module upgrade.
  • Page 141: Removing Or Inserting A Memory Module

    All other areas that require a tool to access should be opened only by an authorized HP service provider. Å WARNING: To prevent exposure to electrical shock and damage to the notebook, shut down the notebook, unplug the power cord, and remove all battery packs before installing a memory module.
  • Page 142 Hardware Upgrades 5. Turn the notebook upside down. 6. Loosen the screw that secures the memory compartment cover 1, and then tilt and remove the cover 2. Opening the memory compartment Hardware Guide 8–13...
  • Page 143 Hardware Upgrades Opening the memory compartment 8–14 Hardware Guide...
  • Page 144 Hardware Upgrades 7. Remove or insert the memory module. To remove a memory module: a. Pull away the retention clips on each side of the module 1. (The module tilts up.) b. Grasp the edges of the memory module and gently pull it out of the memory slot 2.
  • Page 145 Hardware Upgrades Removing a memory module 8–16 Hardware Guide...
  • Page 146 Hardware Upgrades To insert a memory module: a. Align the keyed (notched) edge of the module with the keyed area in the expansion slot 1. b. From a 45-degree angle, press the module into the slot until it is seated 2. c.
  • Page 147 Hardware Upgrades Inserting a memory module 8–18 Hardware Guide...
  • Page 148 Hardware Upgrades 8. Align the tabs on the memory compartment cover with the cover slots on the notebook. 9. Tilt the cover down until it is seated 1. 10. Reinsert and tighten the screw that secures the cover to the notebook 2.
  • Page 149 Hardware Upgrades Closing the memory compartment 8–20 Hardware Guide...
  • Page 150: Replacing The Hard Drive

    Hardware Upgrades Replacing the Hard Drive Remove the hard drive only for replacement. To replace the primary hard drive: 1. Save your work and shut down the notebook. If you are not sure whether the notebook is off or in Hibernation, briefly press the power button.
  • Page 151 Hardware Upgrades Loosening the hard drive assembly retaining screws 8–22 Hardware Guide...
  • Page 152 Hardware Upgrades 7. Remove the hard drive assembly from the bay. 8. Remove the 4 hard drive bracket screws 1. 9. Remove the hard drive from the bracket 2. Removing the hard drive from the hard drive bracket Hardware Guide 8–23...
  • Page 153 Hardware Upgrades Removing the hard drive from the hard drive bracket 8–24 Hardware Guide...
  • Page 154 Hardware Upgrades 10. Insert the new hard drive into the hard drive bracket 1. 11. Replace the 4 hard drive bracket screws 2. Inserting the hard drive into the hard drive bracket Hardware Guide 8–25...
  • Page 155 Hardware Upgrades Inserting the hard drive into the hard drive bay 8–26 Hardware Guide...
  • Page 156 Hardware Upgrades 12. Reinsert the hard drive assembly into the hard drive bay until it is seated 1. 13. Tighten the 2 hard drive assembly retaining screws 2. Inserting the hard drive assembly into the hard drive bay Inserting the hard drive assembly into the hard drive bay Hardware Guide 8–27...
  • Page 157: Finding More Upgrade Information

    Hardware Upgrades Finding More Upgrade Information For additional information about installing, removing, or operating an optional device, refer to the documentation included with the device. 8–28 Hardware Guide...
  • Page 158: Specifications

    Specifications Operating Environment Factor Metric U.S. Temperature Operating 0° to 35°C (non 32° to 95°F writing optical) 5° to 35°C (writing 41° to 95°F optical) Nonoperating -20° to 60°C -4° to 140°F Relative humidity (noncondensing) Operating 10% to 90% 10% to 90% Nonoperating 5% to 95% 5% to 95%...
  • Page 159: Rated Input Power

    Specifications Rated Input Power Input Power Rating Operating voltage 100–240 VAC RMS Operating frequency range 50 to 60 Hz AC When powered by a DC source 18.5 Vdc 6.5 A ✎ This product is designed for IT power systems in Norway with phase-to-phase voltage not exceeding 240 Vrms.
  • Page 160 Index battery release latch 1–30 1–31 blackout periods, modem 7–6 AC adapter Bluetooth wireless 7–15 disconnecting 3–1 bottom components 1–30 1–31 identifying 1–34 buttons adapter, modem 7–5 PC Card eject 1–22 1–24 8–5 airport security devices 4–3 power 1–9 1–10 altitude specifications 9–1 Quick Launch 1–11 AT commands 7–7...
  • Page 161 DVD/CD-RW combo 4–2 See also infrared port; jacks DVD-ROM 4–1 4–2 conserving power, tips 3–10 hard drive 8–21 cords 1–34 HP USB Digital Drive 1–23 country-specific modem cable 1–25 4–2 adapter 7–5 optical 1–23 shipping 4–3 See also optical drive digital media cards 8–6...
  • Page 162 Quick Reference 2–7 1–30 1–31 switching among displays 2–8 hard drive, internal HP USB Digital Drives displaying amount of free space connecting to USB port 4–18 on 8–11 inserting into optional Digital space required for Hibernation Bay 4–22 file 8–11...
  • Page 163 Index IDE 1–7 1–8 1–16 1–18 4–7 keyboard 1–7 1–8 keyboard light 1–7 1–8 num lock 1–7 1–8 2–15 keyboard, external (optional) power 1–5 1–6 numeric keypad 2–13 power/Standby 1–5 1–6 1–16 USB connection 6–3 1–18 keypad keys 1–14 1–15 wireless on/off 1–28 7–12 keypad, numeric 2–13...
  • Page 164 Index country-specific adapter 1–34 external monitor connector 7–5 1–20 1–21 settings 7–6 switching display to or from Modem approval label 1–32 2–8 modem cable 1–34 monitor, external (optional) PAL, PAL-M television formats connector 1–20 1–21 5–9 switching display to or from parallel connector, identifying 2–8 1–20...
  • Page 165 Index software AutoPlay/Autorun/auto insert Quick Launch buttons notification 4–5 assigning 2–12 infrared 6–4 function 1–11 USB support 6–3 speakers 5–3 RAM (Random Access Memory) external (optional) 5–4 8–11 internal stereo 1–17 1–18 regulatory information Standby Modem approval label 1–32 avoiding when playing media System label 1–32 4–4 wireless certification label...
  • Page 166 Index USB connectors 1–23 1–26 1–29 Windows applications key 1–12 USB devices (optional) 1–13 connecting 6–2 Windows logo key 1–12 enabling 6–3 wireless antenna 7–10 wireless certification label 1–32 wireless device VCR (optional), audio-out jack connecting LAN 7–7 function 5–4 turning on and off 7–12 vents 1–20 1–21...

This manual is also suitable for:

Zx5000Zv5000Nx9100Nx9105Nx9110

Table of Contents