Connecting The Video; Displaying A Video Image - HP Compaq NX9600 Hardware And Software Manual

Multimedia

Connecting the Video

To transmit video signals through the S-Video-out jack, you will
need a standard S-Video cable, available from most computer or
electronics retailers.
To connect the S-Video cable:
1. Plug either end of the S-Video cable into the notebook
S-Video-out jack.
2. Plug the other end of the cable into the S-Video input
connector on the external device.
3. If the image is not displayed on your external device, restart
the notebook.

Displaying a Video Image

To display an image on the notebook display or a video device
display, both the notebook and the video device must be
turned on.
To switch the image between the notebook display and the video
device display:
»
Press the
between the notebook display, the video device display, and
both displays simultaneously.
4–6
hotkey. The
fn+f4
hotkey toggles the image
fn+f4
Hardware and Software Guide