Battery Conservation Settings And Procedures - HP Compaq NX9600 Hardware And Software Manual

Battery Conservation Settings and
Procedures
Using the following battery conservation settings and procedures
extends the run time of a battery pack:
■
Turn off wireless and local area network (LAN) connections
and exit modem applications when you are not using them.
■
Do not leave your notebook connected to AC power for
extended periods of time.
■
Disconnect from the notebook any external devices that
use power from the notebook. Battery run time is not
affected by external devices that are plugged into an
external power source.
■
Stop or remove a PC Card you are not using. For more
information, refer to
■
Disable or remove a digital card (SD Memory Card, SD I/O
Card, MultiMediaCard, Memory Stick, Memory Stick Pro,
xD-Picture Card, or SmartMedia) you are not using.
■
Lower screen brightness.
■
Lower system volume.
■
Turn off a device connected to the S-Video-out jack.
■
If you leave your work, initiate Standby or Hibernation or
shut down the notebook.
■
Select a short wait time, 5 minutes or less, for the monitor
timeout. To change monitor timeout settings:
a. Select Start > Control Panel > Performance and
b. Select a short wait time from the Turn Off Monitor list,
Hardware and Software Guide
Maintenance > Power Options > Power Meter tab.
and then select OK.
"Using a PC Card" in Chapter 6.
Power
3–25