Removing An Optical Disc (With Power) - HP Compaq NX9600 Hardware And Software Manual

Removing an Optical Disc (With Power)

1. Turn on the notebook.
2. Press the release button 1 on the drive bezel to release
the media tray, and then pull the tray outward until it is
fully extended 2.
3. Remove the disc from the tray by gently pressing down on
the spindle while pulling up on the outer edges of the disc 3.
Handle the disc by the edges, not the flat surfaces. (If the
media tray is not fully extended, tilt the disc as you
remove it.)
4. Close the media tray.
5. Place the disc in a protective case.
Hardware and Software Guide
Drives
7–11