PSEN opII3B Series
For alignment Pilz recommends the PSEN opII Laserpointer (see
accessories [
Fig.: Transmitter/receiver modification directions during orientation
Legend
[1] Vertical: by vertical shifting of position in the elongated holes in the top and bottom
[2] Horizontal: by moving up and down in the slots in a horizontal direction
[3] The axis orientation can be changed by rotating the flexible bracket right or left
Pilz recommends that modifications to the orientation of the transmitter/receiver be made in
the following sequence:
1. Vertical modification
2. Horizontal modification
3. Axis orientation modification
Safety light curtain alignment
Optimal orientation with the use of a laser orientation aid
The optimal orientation has been achieved with a laser orientation aid if the following condi-
tions are met:
}
The beam of the laser orientation aid attached to the transmitter strikes the receiver and
}
the beam of the laser orientation aid attached to the receiver strikes the transmitter
Perform the orientation as described in the laser orientation aid's operating manual.
Operating Manual PSEN opII3B Series
1004845-EN-02
53]) or another laser alignment aid.
[1]
flexible brackets
[2]
[3]
Order references for
| 27