Tripp Lite B020-U16-19-IP Owner's Manual page 20

6. KVM Operation
Hotkeys
Various configuration actions related to the keyboard, video and mouse can be performed via hotkey combinations. The Hotkey setup utility is
accessed by clicking on the Hotkey / Macros icon and then clicking on the Hotkeys button at the top of the screen. The Hotkeys screen displays
the available hotkeys and their corresponding hotkey combinations.
By default, the only hotkeys that are enabled are the Exit Remote Location and Substitute Alt Key hotkeys. To enable/disable a hotkey, simply
check/uncheck the box to the left of it. To change a hotkeys command sequence, follow the steps below.
1. Highlight the desired hotkey and click on the Set Hotkey button.
2. Key in the desired hotkey combination, one key at a time. The keys will be displayed in the hotkey column as they are entered.
Note: Clicking the Cancel button will cancel the recording process. Clicking on the Clear button will delete any keys that you entered while
keeping the recording process active.
3. When finished entering the hotkey sequence, click on the Save button.
Note: Clicking the Reset button will restore all of the default hotkey command sequences, and enable/disable defaults. You can use the same
function keys for more than one hotkey command sequence, as long as the first key is not the same. For example, you can use [F1, F2, F3]
for one action and [F2, F1, F3] for another, but you cannot use [F1, F3, F2] once [F1, F2, F3] has been used.
The table below lists the default hotkeys, along with a description of their functions and their default command sequences.
Hotkey Description
Exit Remote Location Closes you out of a remote session.
Adjust Video Opens the Video Settings screen.
Toggle Control Panel Toggles the Control Panel off and on. When off, you will not be able to access the control panel.
Adjust Mouse When the local and remote mouse pointers go out of sync, this command brings them back together again. [F8, F7, F6]
Video Auto-Sync Performs a video auto-sync.
Show/Hide Local Cursor Toggles the local mouse pointer on/off.
Substitute Ctrl Key By default, hotkey combinations that use the Ctrl key, such as [Ctrl, Alt, Delete], get sent to the local com-
puter. This hotkey allows you to set a substitute Ctrl key that can be used for the remote computer.
Substitute Alt Key By default, hotkey combinations that use the Alt key, such as [Ctrl, Alt, Delete], get sent to the local com-
puter. This hotkey allows you to set a substitute Alt key that can be used for the remote computer.
( continued )
20
Command Sequence
[F2, F3, F4]
[F5, F6, F7]
[F3, F4, F5]
[F6, F7, F8]
[F4, F5]
F11
F12