Table of Contents
Advertisement
7. Administration
Administration of the KVM switch can be done through three different interfaces; Local Console OSD, Web Interface and Remote OSD. The Web
Interface and Remote OSD give you the most administrative access to the KVM, whereas the settings in the Local OSD are more limited. The
table details which settings are available in each interface, and whether those settings are accessible to Administrators, ordinary Users or both.
The rest of this chapter goes into these interfaces and their settings in more detail.
Set Language of OSD/GUI
Set Ports to Be Displayed in OSDs
OSD Hotkey
Port ID Display Mode
Port ID Display Duration
Scan Select
Scan Duration
Screen Blanker
Logout Timeout
Beeper
Edit Port Names
Set Port Operating Systems
Set Port Operating Systems
Hotkey Command Mode (On/Off)
Hotkey
Port ID Display Position
Touchpad (On/Off)
Reset Station IDs
Set Local Keyboard Language
Set Local Console Mode
Setup IP Address
View Firmware Version
Firmware Upgrade
Reset Default Values
Clear Port Names
View Device Name
View MAC Address
Add, Edit and Remove Administrators/Users
Port Access - Full/View Only/No Access
Setup DNS Server Address
IP Installer Settings - Enabled/View Only/Disabled
Enable and Setup RADIUS and LDAP Servers
Log Server Settings - MAC Address and Port Settings
Enable and Setup IP Address Filters
Enable and Setup MAC Address Filters
Set a Default Web Page Name
Login Failure Settings
Enable/Disable ICMP , Browser, Device List, Multiuser and Force All to Grayscale
Mouse Sync Mode - Automatic/Manual
Backup and Restore System Configuration and User Accounts
Local OSD
Remote OSD
User
Admin
User
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
27
Web Managment Interface
Admin
User
Admin
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Advertisement
Table of Contents
