Operating Systems; Components; Front View - Tripp Lite B020-U16-19-IP Owner's Manual

Console kvm switch with ip access
Hide thumbs Also See for B020-U16-19-IP:
Table of Contents

Advertisement

4. Introduction

4.3.6 Operating Systems

Supported operating systems are shown in the table, below:
Operating System
Windows
Linux RedHat
Linux SuSE
Linux Mandriva (Mandrake)
UNIX AIX

4.4 Components

4.4.1 Front View

Handle: Pull to slide the KVM module out; push to slide the KVM
1
module in. (See item 13.)
LCD Monitor: After sliding the KVM module out, flip up the cover
2
to access the LCD monitor.
LCD Controls: The LCD ON/OFF switch is located here, as well
3
as buttons to control the position and picture settings of the LCD
display.
Station/Port Switches: Press the Port ID Up/Down buttons to
4
switch to the port before/after the currently selected port. Press
the Station ID Up/Down buttons to switch to the station before/
after the currently selected station.
LEDs: The Online Port LEDs illuminate orange to indicate a
5
computer is connected and powered on. The Port ID LED will
display the number of the port that currently has the console's
focus. The Station ID LED will display the number of the station
that currently has the console's focus.
Keyboard
6
Touchpad
7
Power LED: The Power LED illuminates blue to indicate the unit is
8
receiving power.
( continued )
Versions Supported
2000 and higher
7.1 and higher
9.0 and higher
9.0 and higher
4.3 and higher
3
4
6
7
14
8
9
Operating System
UNIX Free BSD
UNIX Sun
Novell Netware
Mac
DOS
2
5
11
10
Rackmounting Tabs: The rackmounting tabs located at each
9
corner of the unit secure the chassis to a system rack.
Lock LEDs: The Num Lock, Caps Lock and Scroll Lock LEDs are
10
located here.
Reset Switch: Press this recessed switch in with a thin object to
11
perform a system reset.
Firmware Upgrade Section: The firmware upgrade cable that
12
transfers the firmware upgrade data from the administrator's
computer to the console KVM switch connects to the port located
here. During normal operation, this switch should be in the
NORMAL position.
Slide Release: In order to bring the console out, you must first
13
release it by sliding these tabs to the inside.
External Mouse Port: An additional USB port is provided on the
14
front panel of the keyboard module for an option external mouse.
USB Peripheral Port: A USB 1.1 port is provided for the sharing
15
of USB peripherals among connected computers (e.g. flash drive,
CD-ROM drive, etc.).
5
Versions Supported
4.2 and higher
Solaris 8 and higher
5.0 and higher
OS 9 and higher
6.22 and higher
13
1
15
12

Advertisement

Table of Contents
loading

This manual is also suitable for:

B020-u08-19-ip

Table of Contents