Inserting Or Removing A Memory Expansion Board - Compaq Armada E700 Series Reference Manual

Inserting or Removing a
Memory Expansion Board
Removing the Memory Expansion Compartment Cover
WARNING:
!
internal compartment on the computer. All other areas that require a
tool to access should be opened only by a Compaq authorized
service provider.
WARNING:
!
pack before installing a memory expansion board can damage the
equipment and expose you to the risk of electrical shock.
CAUTION:
components. Before beginning this procedure, ensure that you are
properly grounded. For more information, refer to Appendix C,
"Electrostatic Discharge."
1. Shut down the computer.
NOTE:
Hibernation, turn the computer on by sliding the power
switch, then shut it down
2. Disconnect all external devices connected to the computer.
3. Disconnect the power cord.
4. Remove all battery packs from the computer.
5. Turn the computer bottom side up on a flat surface with the
front panel facing you.
13-2 Expanding Memory
The memory compartment is the only user-accessible
Failure to unplug the power cord and remove the battery
Electrostatic discharge (ESD) can damage electronic
If you are unsure whether the computer is off or in