Compaq Armada E700 Series Reference Manual page 63

When more than one drive is in the system, the computer selects
the drive to start from by searching for, first, a bootable CD-ROM
or DVD-ROM; second, a bootable diskette; and third, a bootable
hard drive.
A bootable device or medium contains files needed by the
computer to start up and operate properly.
The computer can start from
Any bootable hard drive or bootable drive medium, such as a
CD-ROM, DVD-ROM, or diskette, in the computer.
Any bootable diskette drive diskette (but not a SuperDisk
LS-120 drive diskette) in an optional expansion base.
Any bootable peripheral interconnect (PCI) network adapter
board in the computer.
By default, Phoenix MultiBoot is disabled and the computer
selects the startup device by searching these locations in this
sequence:
1 Computer top MultiBay or
Dual MultiBay
2 Computer bottom MultiBay
3 Computer hard drive bay
4 Docking base left MultiBay
5 Docking base top or right
MultiBay
The availability and location of docking base bays and the
availability and sequencing of docking base PCI slots varies by
model and configuration.
To enable MultiBoot and change the sequence of the computer
drive bay locations that the computer searches during startup:
1. Restart the computer, then press
appears upper-right on the screen.
To change the language, press
For navigation instructions, press
2. Select AdvancedÆBoot Options, then press
3. Toggle the MultiBoot field to Enable.
6 Docking base bottom
MultiBay
7 Ethernet board in computer
8–10 Docking base PCI slots
containing Ethernet, Token
Ring, or network boards.
when the blinking cursor