Inserting And Removing A Memory Expansion Board - Compaq Evo N410c Hardware Manual

Inserting and Removing a Memory
Expansion Board
Å
WARNING: Failure to unplug the power cord and remove all battery
packs before installing a memory expansion board can damage the
equipment and expose you to the risk of electrical shock.
If a memory board is already installed, remove it. See "Removing
a Memory Expansion Board" later in this chapter.
Inserting a Memory Expansion Board in the Memory
Expansion Compartment
1. Shut down the notebook.
2. Close the display.
3. Turn the notebook bottom side up and remove the screw 1
securing the memory expansion compartment cover to the
base assembly.
4. Lift the back edge of the memory expansion compartment
cover and swing it up and forward 2 .
Hardware Guide
Notebook Upgrades and Add-ons
8–3