Removing a Dual-MultiBay Battery Pack from
the Dual MultiBay
CAUTION:
that is the only power source available to the system:
1. If the computer is on, the battery bay does not contain a
charged battery pack, and the system is not connected to
external power, initiate Suspend (Standby) by pressing the
suspend button.
NOTE:
2. Tilt the computer up , then slide the front MultiBay release
latch
center lower edge of the battery pack .
4-6 Inserting, Removing, or Storing a Battery Pack
To prevent loss of work while replacing a battery pack
Initiate Suspend (Standby) before removing the discharged
battery pack.
Insert the replacement battery pack within 5 minutes after
removing the discharged battery pack.
Extensive drive activity may delay Suspend (Standby).
toward the rear of the computer while pulling on the