European Union Notice - Compaq Armada E700 Series Reference Manual

European Union Notice

Products with the CE marking comply with Telecommunication
Terminal Equipment and Satellite Earth Station Equipment (TTE
& SES) Directive (98/13/EC), the EMC Directive (89/336/EEC)
and the Low Voltage Directive (73/23/EEC) issued by the
European Community.
Compliance with these directives implies conformity to the
following European Norms or Regulations (in brackets are the
equivalent international standards and regulations):
EN55022 (CISPR 22)—Electromagnetic Interference
EN50082-1 (IEC801-2, IEC801-3, IEC801-4)—
Electromagnetic Immunity
EN60950 (IEC950)—Product Safety
CTR21 (ETSI TBR21)—Attachment requirements for
connection to the analogue PSTNs of terminal equipment
The equipment has been approved in accordance with Council
Decision 98/482/EC for pan-European single terminal connection
to the Public Switched Telephone Network (PSTN). However, due
to differences between the individual PSTNs provided in different
countries, the approval does not, of itself, give an unconditional
assurance of successful operation on every PSTN network
termination point. In the event of problems, you should contact
your equipment supplier in the first instance.
The equipment is designed to work with all EU telephone
networks. However, the equipment may have interworking
difficulties for some connections on the EU public networks.
Dialling by loop disconnect pulses is not intended to be used on
the PSTN. This feature is only supported in consideration of PBX
or other equipment which requires pulse dialling.
Network compatibility is dependent on software switch settings
which are set automatically by the country selection. The user
should contact the equipment supplier in case of difficulty in
network settings.
Regulatory Notices B-7