Calibrating A Battery Pack - Compaq Armada E700 Series Reference Manual

Calibrating a Battery Pack

Calibration increases the accuracy of all battery charge displays.
The calibration utility supports all battery packs that can be used
in the computer.
Use the calibration utility both to check the calibration of a battery
pack and to calibrate or recalibrate a battery pack.
A battery pack cannot be calibrated unless the utility reports
that it needs calibration.
A new battery pack can be charged, then used to run the
computer before the battery pack is calibrated. However,
the amount of charge in the new battery pack cannot be
reported accurately until the new battery pack has been
calibrated.
NOTE:
30 days of first use. Because the calibration process
comprises a full charge followed by a full discharge,
calibrating a new battery pack meets this full-charge
requirement.
Check the calibration of an in-use battery pack
periodically and whenever battery charge displays seem
inaccurate.
NOTE:
discharge a battery pack, the more frequently you should
check the calibration of the battery pack.
While a battery pack is being calibrated, it is fully charged,
then fully discharged.
A battery calibration icon in the taskbar displays an Up
arrow during the charge phase and a Down arrow during the
discharge phase.
A calibration cannot resume if the calibration is stopped or
if the computer is shut down or placed in Suspend
(Standby) during a calibration. An interrupted calibration
must be restarted.
After calibration, a battery pack must be charged before it
can be used to run the computer.
The calibration utility calibrates one battery pack at a time
and can run while you use the computer or overnight.
5-10 Managing Power
A new battery pack must be fully charged within
The more frequently you partially charge and