Using Cbarge; Using Meet-Me - Cisco 7920 Series User Manual

Using cBarge

You can create a conference by using cBarge to add yourself to a call on a shared line.
If you want to...
Create a conference by
barging a call on a shared line
See a list of conference
participants or remove
participants

Using Meet-Me

Meet-Me conferencing allows you to start or join a conference by calling the conference number.
If you want to...
Start a Meet-Me conference 1. Obtain a Meet-Me phone number from your system administrator.
Join a Meet-Me conference
End a Meet-Me conference
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Then...
1. Press
2. Choose Options > cBarge.
See Using a Shared Line, page
Choose Options > ConfList. See
Participants, page
Then...
2. Distribute the number to participants.
3. When you are ready to start the meeting, choose Options >
MeetMe.
4. Dial the Meet-Me conference number.
5. Press
Participants can now join the conference by dialing in.
Note Participants hear a busy tone if they call the conference before the
initiator has joined. In this case, participants must call back.
1. Dial the Meet-Me conference number (provided by the conference
initiator).
2. Press
Note You will hear a busy tone if you call the conference before the
initiator has joined. In this case, try your call again.
All participants must hang up.
The conference does not automatically end when the conference
initiator disconnects.
to select a call on a shared line.
60.
Viewing or Removing Conference
52.
.
.
Basic Call Handling