Cisco 7920 Series User Manual page 55

If you want to...
Transfer a call without
talking to the transfer
recipient
Talk to the transfer
recipient before transferring
a call (consult transfer)
Transfer two current calls
to each other
(direct transfer) without
staying on the line
Redirect a call to your voice
messaging system
Tips
• If on-hook transfer is enabled on your phone, you can either disconnect to complete the transfer,
or choose Options > Trnsfer and then disconnect.
• If on-hook transfer is not enabled on your phone, disconnecting without using Trnsfer again places
the call on hold.
• You cannot use Trnsfer to redirect a call on hold. To remove the call from hold before transferring
it, choose Resume.
Cisco Unified Wireless IP Phone 7925G, 7925G-EX, and 7926G User Guide for Cisco Unified Communications Manager
FCS REVIEW DRAFT - CISCO CONFIDENTIAL
Then...
1. From an active call, choose Options >Trnsfer.
2. Dial the target number.
3. Choose Options > Trnsfer again to complete the transfer or
EndCall to cancel.
Note If your phone supports on-hook transfer, you can alternately
complete the transfer by disconnecting.
1. From an active call, choose Options > Trnsfer.
2. Dial the target number.
3. Wait for the transfer recipient to answer.
4. Choose Options > Trnsfer again to complete the transfer or
EndCall to cancel.
Note If your phone supports on-hook transfer, you can alternately
complete the transfer by disconnecting.
1. Scroll to highlight any call on the same line.
2. Choose Options > Select.
3. Scroll to highlight the other call on the same line.
4. Choose Options > DirTrfr.
The two calls connect to each other and drop you from the call.
Note If you want to stay on the line with the callers, use Join instead.
Choose Options > iDivert.
The call is automatically transferred to your voice message greeting.
You can use iDivert with a call that is active, ringing, or on hold.
Basic Call Handling
appears by the selected call.