Advertisement
Windows Vista
1. Open Network and Sharing Center (Start > Control Panel > Network and Sharing center).
2. Click on "Connect to a network".
3. Choose "Connect to the Internet" and click on "Next".
4. Choose "NetComm n3G Series".
5. Click on the wireless network name and click "Connect".
6. Click on "Display Characters" and type in the network key. Then Click "Next".
7. Select the appropriate location. This will affect the firewall settings on the computer.
8. Click on both "Save this network" and "Start this connection automatically" and click "Next".
Windows 7
Follow these steps:
1. Open Network and Sharing Center (Start > Control Panel > Network and Sharing center).
2. Click on "Change Adapter settings" on the left-hand side.
3. Right-click on "Wireless Network Connection" and select "Connect / Disconnect".
4. You should see a network listed with the SSID of your 3G25W-R. Select your wireless network and click "Connect".
5. Type the following into the "Security key" section: a1b2c3d4e5 and click "OK".
6. You may then see a window that asks you to "Select a location for the 'wireless' network". Please select the "Home" location.
7. You may then see a window prompting you to setup a "HomeGroup". Click "Cancel" on this.
8. You can verify your wireless connection by clicking the "Wireless Signal" indicator in your system tray. After clicking on this, you should see an
entry matching the SSID of your 3G25W-R with "Connected" next to it.
Mac OSX 10.6
Advertisement
