Advertisement
2G/2.5G LED
3G/3.5G LED
USB / 3G LED
WAN LED
LAN LED
WiFi LED
Restoring Factory Defaults
This feature will reset the Router to its factory default configuration. Occasions may present
themselves where you need to restore the factory default settings on your router. Typical
situations are:
You have lost your password and unable to login to the router;
Amber in quick flash
Green
Green in quick flash
Green
Green in flash
Green
Green in flash
Green
Green
Green in flash
Green
Green in flash
Green
Green in flash
Green in fast flash
three (middle)
Roaming alert, and 3G signal is
middle
Connected.
Signal strength in level four or
five (strong)
Roaming alert, and 3G signal is
strong
EDGE or GPRS connection is
established
Data packet transferred via
2G/2.5G
UMTS/HSDPA/HSUPA
connection is established
Data packet transferred via
3G/3.5G
Connected with 3G dongle via
USB port
RJ45 cable is plugged
Data access
RJ45 cable is plugged
Data access
WLAN is on
Device is in WPS PBC mode
Device is in WPS PBC mode
Advertisement
