Operation - jbc WSU Instruction Manual

WSBT-B

Operation

Depending on where the tool is located, the soldering station switches between three different Depending on where the tool is located, the soldering station switches between three different
states: Work, Sleep and Hibernation. states: Work, Sleep and Hibernation.
These states are available for JBCs wire strippers WS140 and WS440.
1. Work
When the wire stripper is lifted
from the stand, the cartridges
will heat up according to the
selected configuration.
Kapton
®
90%
PI
P o w e r 7 5 % P o w e r 7 5 %
Troubleshooting
Station troubleshooting available on the product page at www.jbctools.com
6
2. Sleep
When the wire stripper is in the
stand, the power falls after a
specified time.
Kapton
®
90%
PI
Sleep
P o w e r 3 5 % P o w e r 3 5 %
3. Hibernation
After longer periods
inactivity, the power is cut off
and the cartridges cool down
to room temperature.
Kapton
®
90%
PI
Hibernation
P o w e r 0 % P o w e r 0 %
of