Notes on trouble-shooting
In case of errors which impair radiography, perform the following checks.
Checking the line voltage, fuses and LEDs
a) Checking the line voltage
•
Measure the supply voltage on site at the safety socket using the digital multimeter.
NOTICE
•
Plug the power plug of the POLYMOBIL into the safety socket.
•
POLYMOBIL ON
NOTICE
•
POLYMOBIL OFF.
Siemens AG
Medical Solutions
For voltages > 240 V AC see Startup Instructions
RXB8-115.034.02... chapter 3.
If the POLYMOBIL cannot be switched on although the power plug
and power voltage have been connected, the overcurrent circuit
breaker F1 may have responded (automatic circuit breaker
1/Fig. 1)
RXB8-115.061.02
Rev. 01
Page 1 of 24
10.95
CS PS 24
4 - 1
4
4
POLYMOBIL III