Advertisement
Fixing CTS to Workbench
Workbench
Self-locking Nut*
40 mm
To protect the stand's rubber feets from wear and tear when fixing CTS in place put the spacers
(Ref. 0014899) between the stand and the workbench.
Use screws (we recommend M4) and assemble them with washers and self-locking nuts to fix the
CTS in place. Check that the stand is stable and leveled.
Spatulas
Use the spatula to eliminate the dross (Oxide
and other contaminants that form on the
surface of molten solder)
Spatula 17mm / 0.67in
200 mm
130 mm
Screw*
100 mm
Washer*
80 mm
Spacer
60 mm
Washer*
50 mm
Spatula 39mm / 1.54in
*Screws, washers and the self-locking nuts are not included.
Spatula
para manuales - color gris
130 mm
5
Advertisement
