Advertisement
Operation
CTS Solder Pot Cartridge Stand holds the handle T245 or T470 with its Solder Pot Cartridge to
avoid it tipping over accidentally. Find the cartridges availables in www.jbctools.com
As a safety precaution, before placing the handle, make sure the station is off and the tin is cold.
Screw
1. Unlock the screw and open the holder.
- Do not melt "flux core solder".
- Recommended temperatures for fine wires (up to AWG 24 aprox) and lead free solder
is 300ºC. For thicker wires, increase the temperature as necessary, but always the
minimum possible.
4
Holder
CHB Converter
Handle
2. Place the handle with its solder pot
cartridge previously inserted. Be careful to
position it correctly.
Handle
3. Once in place, lock the screw and connect
the handle to the stand or directly to JBC
stations or control units using CHB Converter.
Solder Pot Cartridge
Screw
Advertisement
