Network Settings - Pantum M6500W User Manual

Note: Set auto off condition:
• Shutdown under no-port state (default configuration): no port is connected, Wi-Fi
function deactivated, printer is under standby or sleep mode.
• Shutdown under idle state: the printer is under standby or sleep mode.
• If auto off condition is satisfied, printer will be off at the preset time.
• After printer is off, power consumption is 0.5W or lower.
• Individual countries (or regions) do not support auto off setting.

7.1.6. Network Settings

You can view or set the network status through Network Settings.
1) Press "Menu" button to enter the menu interface.
2) Press direction pad "▲" or "▼" to select System Settings and press OK button.
3) Press direction pad "▲" or "▼" to select Network Settings and press OK button.
M6200/M6500/M6550 Series
5
M6600 Series
7-6