Advertisement
ULTRA CLEAR RESOLUTION CAMERA
Operating Instructions
Using OSD Controller
Setup menu can be accessed and controlled by OSD control joystick inside
of the camera unit. Five commands are available with the joystick.
The design of OSD could be different according to the Models.
■ Description of the OSD control operation
1] SET Key (●) : Access to the menu or enter the setting.
To enter the main menu, press the Set Key down.
2] UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move the
cursor up or down.
3] LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu. Used
to adjust the desired menu selection and to move the cursor left or right.
NOTE
If OSD menu is adjusted in specific video format, adjusted value is applied to
only related video format. For example, if the menu is adjusted in CVBS mode,
adjusted value is applied to CVBS video only.
OSD Control &
Video format Joysick
Using Video Format Switch
■ DIP SWITCH setting
The DIP SWITCH setting has first priority.
If the switch is set to CVBS, only CVBS output is available for both main video
output and sub-out. Please be advised that camera generates only one video
output for both main video output and sub-out. It takes 3~5 seconds when video
format is changing. The default DIP SWITCH setting is HD-TVI mode.
11
Video format
DIP Switch
Advertisement
