Omron Sysmac CPM1 Operation Manual page 141

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code
1 December 1995
2 March 1997
3 July 1997
Revision History
Cat. No. W262-E1-4
Date
Original production
Precautions added in front of Section 1.
Page ix: CPM1 Programming Manual corrected to CQM1/CPM1/CPM1A/SRM1 Programming
Manual. Reference to the CPM1-series Dedicated I/O Units Operation Manual was removed as this
manual does not exist.
Pages ix, 10, 87, 97: References to the Ladder Support Software (LSS) removed.
Page 3: PT programming feature added.
Page 4: Top sentence corrected.
Pages 4 to 6: References to the Programming Manual added.
Page 8: Link Adapter model number corrected. "OMRON PCs" in 1-to-n Communications corrected to
"CPM1 PCs."
Page 11: Ladder Support Software information removed. Remaining information in table updated.
Pages 11, 46: SSS version information corrected to include all SSS versions.
Page 14: Shock resistance corrected.
Page 15: Input bits, output bits, work bits, and special bits corrected. Input interrupt and interval timer
interrupt information added. Note added.
Page 16: Backup Time vs. Temperature rewritten.
Pages 16, 17: ON delay and OFF delay information corrected.
Page 17: Caution added to the table.
Page 18: Relay information removed. Caution added to the table.
Page 20: Power Supply output terminal description corrected.
Page 22: Expansion connector information removed.
Page 23: Notes added.
Page 26: 3-1-3 Power Supply Voltage added.
Page 27: 3-2-1 Installation Site Conditions added.
Page 29: Expansion I/O Unit removed from the top sentence.
Page 31: Caution added.
Page 32: Wire diameter in Grounding and 100 to 240 VAC Power Supply and tightening torque in
Crimp Connectors corrected. Cautions and note added.
Pages 33, 34: Input wiring diagrams corrected.
Page 34: "COM(+)" corrected to "COM(–)" for the PNP current output.
Page 40: Connection diagram corrected. "Other OMRON PCs" removed, only CPM1 PCs can be
connected.
Page 41: Tightening torque corrected.
Pages 42, 43: Connection diagram corrected.
Page 55: Caution at the end of 4-2-3 Changing the CPM1's Mode rewritten. 4-3-1 Overview added.
Page 56: Caution added to the end of 4-3-2 Clearing Memory. Fatal error information in the first para-
graph of 4-3-3 Reading/Clearing Error Messages corrected.
Pages 69 to 73: Cautions added.
Page 74: Minor correction to the PASSWORD display.
Page 82: Information and notes added to 5-1-1 Initial System Checks.
Pages 82, 83: Information in 5-1-3 Flash Memory Precautions replaced.
Page 85: Information for "Power interruption" corrected.
Page 89: Minor addition to the flowchart.
Page 90: "Replace the Power Supply Unit" corrected to "Replace the CPU Unit."
Page 92: Flowchart corrected.
Page 95: 5-7 Maintenance Inspections and 5-8 Handling Precautions added.
Page 97: Information added after the Communications Adapters table.
Page 3: Note on Expansion I/O Units added.
Page 7: Description added after the table for the CPM1 Expansion I/O Unit.
Pages 12, 46, 101: SYSMAC-CPT information added.
Page 34: Information and caution for 24-VDC Power Supply rewritten.
Page 101: Expansion I/O Unit models added.
Revision code
Revised content
131