Binary Data Modification; Signed Decimal Data Modification - Omron Sysmac CPM1 Operation Manual

Hide thumbs Also See for Sysmac CPM1:
Table of Contents

Advertisement

Programming Console Operations

4-3-20 Binary Data Modification

!
Caution
1, 2, 3...

4-3-21 Signed Decimal Data Modification

2. Press the CHG Key to begin hexadecimal, BCD data modification.
3. Input the new PV and press the WRITE Key to change the PV.
The operation will end and the normal monitoring display will return when
the WRITE Key is pressed.
C
A
A
2
0
0
WRITE
This operation is used to change the status of a word's bits when the word is
monitored using the procedure described in 4-3-13 Binary Monitor. It is pos-
sible in MONITOR or PROGRAM mode only.
RUN
MONITOR
No
OK
Bits SR 25300 to SR 25507 and timer/counter flags cannot be changed.
Check that there is no effect on equipment before changing the present values.
1. Monitor the status of the desired word according to the procedure described
4-3-13 Binary Monitor.
(BInary monitor)
2. Press the CHG Key to begin binary data modification.
A flashing cursor will appear over bit 15. The cursor indicates which bit can
be changed.
3. Three sets of keys are used to move the cursor and change bit status:
a) Use the Up and Down Arrow Keys to move the cursor to the left and right.
b) Use the 1 and 0 keys to change a bit's status to on or off. The cursor will
move one bit to the right after one of these keys is pressed.
B
c) Use the SHIFT+SET and SHIFT+RESET Keys to force-set or force-re-
set a bit's status. The cursor will move one bit to the right after one of
these keys is pressed. The NOT Key will clear force-set or force-reset
status.
Note Bits in the DM Area cannot be force-set or force-reset.
4. Press the WRITE Key to write the changes in memory and return to the
binary monitor.
WRITE
This operation is used to change the decimal value of a word being moni-
tored as signed decimal data, within a range of –32,768 to 32,767. The con-
PRES VAL?
CHG
D0000 0119
D0000
0200
PROGRAM
OK
c001 MONTR
1000010101010101
c001 MONTR
CHG
000010101010101
c001
10 0010101010101
c001
1
101 010101010101
c001
1010010101010101
Section 4-3
????
CHG?
CHG?
MONTR
75

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sysmac cpm1-30cdr-d-v1

Table of Contents