Table of Contents
Advertisement
Buttons
Function Description
18.Monitor/Call
Press this button to trigger this function and the
CTCSS, DCS, and 2Tone/DTMF signaling will be
Cancel
closed, so you can receive the signal that can't be
heard in the normal operation. Press this button
again to return to the normal operation. Press this
button in the selective call state to quit such a state.
Hold this button to open the squelch. Loosen this
19.Squelch off
button to return to the normal operation. Press this
momentary/
button in the selective call state to quit such a state.
Call Cancel
Press this button to open squelch, press it again to
20.Squelch off/
return to normal operation.Press the button in the
Call Cancel
selective call state to quit such a state
Press the top button which programmed as
21.Emergency
Emergency Alarm, the emergency tone could be
Alarm
sent as the set in program software, and also the
identity and background sound could be sent to your
partners and system.
22.Call Button 1
Sends the DTMF/2Tone code assigned to call 1 key.
23.Call Button 2
Sends the DTMF/2Tone code assigned to call 2 key.
24.Call Button 3
Sends the DTMF/2Tone code assigned to call 3 key.
25.Call Button 4
Sends the DTMF/2Tone code assigned to call 4 key.
26.Menu Select
To enter the menu mode or make menu selections.
/Enter
27.Lone worker
Enables Lone worker function
9
Buttons
Function Description
Press this button, the radio will enter the fast menu
28.Scan List Edit
mode for scan list edit. For details, see "Menu
Operation".
29.Backlight
Press the button, the backlight could be chosen
Select
among light for long time, dark for long time, and light
automatically.
Monitor/ Hook Detection: select the Hook or Desk Mic Monitor
function.
5. Radio Call
5.1 Send Selective Call
A. Press "Menu Select/Enter" button to enter the menu mode.
B. Press
/
button until
P
button to select "SEL CALL".
C. Press
3
D. Press
/
button until the required call list appears.
E. Press "PTT" button to send the selective call.
F. Press "PTT" button and speak to the microphone in normal
voice. Please keep the microphone about 3 to 4 cm far from your
mouth. After speaking, please loosen the "PTT".
P
G. Press
button to return to the previous operation.
1
5.2 Receive Selective Call
Receiving a selective call, you will hear the alert tone and the LED
"
"
RADIOCAL .
10
Advertisement
Table of Contents
