Kirisun PT810003 Instruction Manual
  1. Manuals
  2. Brands
  3. Kirisun Manuals
  4. Radio
  5. PT810003
  6. Instruction manual

Kirisun PT810003 Instruction Manual

Vhf/uhf mobile radio
Hide thumbs Also See for PT810003:
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTION MANUAL
PT8100
VHF/UHF MOBILE RADIO

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT810003 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Kirisun PT810003

Summary of Contents for Kirisun PT810003

  • Page 1 INSTRUCTION MANUAL PT8100 VHF/UHF MOBILE RADIO...
  • Page 2 Memo： INSTRUCTION MANUAL PT8100 VHF/UHF MOBILE RADIO MANDATORY SAFETY INSTRUCTIONS TO INSTAL- -LERS AND USERS Use Only manufacturer or dealer supplied antennas. ● Antenna minimum safe distance: 108 cm. ● Antennas used for this transmitter must not exceed an ● antenna gain of 3 dBi.
  • Page 3 Closer than the above indicated minimum safe distance to the antenna (i.e. 108cm). To comply with current FCC RF Exposure limitations, the antenna must be installed at or ● exceeding the minim--um safe distance indicated above, and in accordance with the requirements to the antenna manufacturer or supplier.

  • Page 4: Table Of Contents

    CONTENTS 1. Package-opened Inspection and Installing......1 Caution: 2. Radio Overview..............3 Changes or modifications not expressly approved by the party responsible for compliance could void 3. Basic Operation..............6 the user's authority to operate the equipment. 4. Programmable Button Function..........7 5. Radio Call.................11 5.1.

  • Page 5: Package-Opened Inspection And Installing

    1. Package-opened Inspection and Installing Preparation 1.2.1 Connection of Power Cable Please check the radio in the package and the supplied acce- ＊ 　 First of all, please check whether there is a hole for the ssories in the following table before using. Any articles are power cable on the insulating board.

  • Page 6: Radio Overview

    （3）LCD display screen ＊ Connect the antenna and the power cable to the radio. For details, see “LCD Display”. ＊ Install the microphone hanger at the position easy to use, with （4）Volume Control knob 2 M4*16 self-tapping screws. (The microphone and its cable sho- To be used to adjust volume.

  • Page 7: Basic Operation

    3．Basic Operation Display Description ① Startup: “H” means the transmission of signal for the Press the red POWER button for a long time (at least 1.5 seconds) radio at the high power; to switch the radio on/off Call Received indicator. ②...

  • Page 8: Programmable Button Function

    4． Programmable Button Function Buttons Function Description ， ， ， ， can be programmed as one of the auxiliary button to adjust the level. Press the button 10.Squelch Level Selection functions. to save the selected squelch level and quit this mode.

  • Page 9: Radio Call

    Buttons Function Description Buttons Function Description Press this button, the radio will enter the fast menu 28.Scan List Edit 18.Monitor/Call Press this button to trigger this function and the mode for scan list edit. For details, see “Menu CTCSS, DCS, and 2Tone/DTMF signaling will be Cancel Operation”.

  • Page 10: Zone

    Indicator will blink orange. Icon flashes and the caller’s ID or D. Press button until the zone name you require is appeared. name displays. E. Press button for selection. ②. Select the zone through “ZONE UP” or “ZONE DOWN”button. Press PPT button for callback. 5.3 Call Alert After the radio receives the call alert, the alert tone will sound and 7.

  • Page 11: Scan

    button until “UTILITY”. 9. Scan B. Press C. Press button for selection. In order to receive the calls from many channels, the radio can be D. Press button until the items you require are showed. programmed to scan these channels. At most there are 16 channels E.

  • Page 12: Edit Scan List

    9.3 Edit Scan List ⑨. Press button to return to the previous operation. 9.4 Add or Delete the Channels in the Scan List A. Press the “Menu Selection/Enter” button to enter the menu 10. OST mode. In a certain specific channel, you can revise the CTCSS/DCS button until “PROG LST”.

  • Page 13: Trouble Shooting Guide

    It will enter the user mode. Number Problem Solution ②. Connect the slave radio with the wired clone cable first, and then Phase lock A. The crystal X1 of phase lock loop is broken, turn on. please replace it. loop ③.

  • Page 14: Major Specifications

    Problem Solution Memo： A.Power amplifier IC1 is broken, and no The red transmission power is output, please replace it. Indicator lights but no B. The microphone is broken, please sound is heard. replace it. The green receiving A. The speaker is broken. Please replace it. dictator lights but no B.
  • Page 15 We, Kirisun Electronics (Shenzhen) Co., Ltd. 2/F, Bldg.H-3, East Industrial Zone Of Overseas Chinese Town, Shenzhen 518053, China Declare on our sole responsibility that this equipment complies with the essential requirements of the Radio and Telecommunication Terminal Equipment Directive, 1999/5/EC, and that any applicable Essential Test Suits measurement has been performed.

This manual is also suitable for:

Pt8100

Table of Contents