Table of Contents
Advertisement
Procedure 1 Disassembling the Camera
Step Action
1
Remove the bungs from the camera base and remove the screws from the top of the camera
with a safety screwdriver (4).
2
Gently remove the top cover (3).
3
Set the top cover aside.
Note:Unscrew the top cover safety wire to fully remove the top cover.
Procedure 2 Mounting the camera
Step Action
1
Use the mounting template to mark holes that correspond to the camera base on the mount-
ing surface.
2
Drill holes.
3
Fasten the anchors to the mounting surface with screws.
4
Secure the unit bottom case to the wall or ceiling with tapping screws.
5
Adjust the viewing angle.
5
Illustra Pro 2MP and 3MP Compact Camera Quick Start Guide
Figure 8 Disassembling the Compact camera
- End -
8200-1631-01 B0
Advertisement
Table of Contents
