Table of Contents
Advertisement
Illustra Pro 2MP and 3MP Compact Camera Quick Start Guide
6
Ensure that the top cover safety wire is connected and securely fit the top cover.
Depending on the material of your mounting surface, you may require different screws and
anchors than those as supplied. To prevent the unit from falling off, ensure that it is secured to a
WARNING
firm place (ceiling slab or channel) with the safety wire (supplied) strong enough to sustain the
total weight of the unit. Pay also attention to the finishing at the end of the wire. Never turn the lens
more than 360°, which should disconnect or break internal cables.
Ensure that the Safety wire is connected with one end to the ceiling and the other to the safety-cord
CAUTION
screw of the unit.
8200-1631-01 B0
Figure 9 Mounting the camera
- End -
6
Advertisement
Table of Contents
