Table of Contents
Advertisement
Default IP Address
Since this is a network-based unit, an IP address must be assigned at the very first bootup. The
default IP address of the unit is 192.168.1.168 and sub mask is 255.255.255.0.
However, if you have a DHCP server in your network, the unit obtains an IP address automatically
from the DHCP server so that you do not need to change the IP address of the camera.
Note:If you assign the camera a Static IP address prior to DHCP being enabled, the camera first
reboots for approximately 30 seconds and then remains accessible at its Static IP until it connects to
a DHCP server.
• Connect to a PC directly: Directly connect the camera to a PC using a standard Ethernet
cable. This requires POE switch or injector.
• Connecting a camera to a Local Area Network (LAN): To add the camera to an existing
LAN, connect the camera to the POE hub or switch on your network.
Default camera settings
The following table describes the default camera settings.
Note:At first login the user is prompted to change the default username and password.
11
Illustra Pro 2MP and 3MP Compact Camera Quick Start Guide
Network Connection
Figure 14 Network connection diagram
Network Settings
DHCP
Static IP Address
Default Username
Default Password
Defaults
Enabled
192.168.1.168
admin
admin
8200-1631-01 B0
Advertisement
Table of Contents
