Table of Contents
Advertisement
Procedure 3 Adjusting the Position
The unit has three axes for positioning, refer to Figure 10 on page 7. While monitoring, adjust the
position as below.
Step Action
1
Pan Adjustment (A) For Wall Mount and Tilted Ceilings:
a
Rotate the lens base (maximum 140°) until you are satisfied with the field of view.
2
Horizontal Rotation (B):
a
Rotate 3D assembly in the base. Do not turn assembly more than 354° as this
assembly may cause the internal cables to twist and disconnect or break.
3
Tilt Adjustment (C):
a
Tilt the lens base (maximum 125° from the frontal mounting surface) until you are sat-
isfied with the field of view.
Limitation of three axis positions of lens centroid:
• Pan range: 140°
CAUTION
• Tilt range: 15° to 125° from frontal mounting surface
• Rotate (z-axis): 354°
7
Illustra Pro 2MP and 3MP Compact Camera Quick Start Guide
Figure 10 Adjusting the position of the camera
8200-1631-01 B0
Advertisement
Table of Contents
