Gorenje B800XE Instruction Manual page 25

5. Using the selector control knob, select the
desired blending speed1, 2 or PULSE.
6. The PULSE function remains on as long as the
PULSE button is pressed down, for greater
control when blending, e.g. when chopping
nuts or chocolates, or crushing ice.
7. Setting 1 and 2 will provide continuous
blending until the control knob is turned to the
'0' position.
8. You can add further ingredients while blending.
For this, remove the measuring cup from the
pouring hole.
9. After you have completed blending, turn the
control knob to the '0' position.
Safety locking system
With safety in mind, this blender and coffee mill are
designed with a safety locking system. Unless the
lid and blending jug or coffee mill are positioned
correctly and locked in place, the blender or coffee
mill will not operate.
A Guide to Your Blender
Processing
Food
Task
Milkshakes,
Aerating
smoothies
Nuts, chocolate,
Chopping
garlic or herbs
Creaming Butter or sugar
Bread crumbs,
Crumbing
biscuit crumbs
Crushing lce
Emulsifying Salad dressing
Making icing
Crystal sugar
sugar
Mixing Batters, cades
Soups,
pureeing vegetables,
fruits
ATTENTION! Times for processing will vary with the quantity in the blender jug, these times are only a guide
Suggested
Setting
1, 2
PULSE
1, 2
1, 2
Ice 1, 2,PULSE
1, 2
1, 2
1, 2
1, 2
For correctly assembling the blender, operate as
follows:
1. Place the main body on the table, with the front
facing toward you.
2. Place the blending jug onto the main body with
the handle to the right. The jug is placed correctly
when the arrow on the jug is positioned right
above the open lock on the motor base.
3. Turn the blending jug to the right until you hear a
slight click. The arrows on the motor base and
blending jug should now be aligned with each
other. If this is the case, the blending jug is locked
correctly.
4. Position the lid onto the blender so that the long
holding lip is facing toward you.
5. Turn this holding lip to the right, so that is it
positioned right on top of the jug handle. Now the
blender is ready for use.
Suggested Processing Procedure
Use chilled milk. Blend it until desired
consistency is achieved.
Process 1/2 cup at a time, to ensure evenly sized pieces.
Blend butter and sugar until creamed. It is advisable to top half way
through and scrape the mixture down from the sides of the blender jug.
DO NOT OVERPROCESS.
Break into pieces and process until crumbed.
Add 1/4 cup of water. Use any setting or the PULSE button 3-4 times in
succession for crushed iced
Blend until well combined. Oil may be added to the mixture during
processing through the pouring hole in the lid.
Process for approximately 20 seconds for caster sugar and then a
further 10 seconds for icing sugar.
Process ingredients until just combined.
OVERPROCESS.
Blend until smooth.
24
DO NOT