quadient DS-95i Manual page 75

2. Turn the separation adjustment wheel clockwise until a slight resistance is felt on the
document when the document is moved backwards and forwards.
3. Turn the separation adjustment wheel clockwise to get more resistance or counter
clockwise to lower the resistance.
4. Check the separation before starting the system. After starting the system it may occur
that more than one document at a time is pulled in. If this happens, turn the separation
adjustment wheel more clockwise to obtain correct operation. For poor feeding turn
the separation adjustment wheel counter clockwise.
Feeder Tray Capacity
To avoid irregular feeding there are three levels for the maximum heights of the feeder tray
capacity. The symbols for these three levels are printed on the right hand side guide of the
feeder tray. The level indication is a guideline.
Maximum feeder tray capacity of booklets with a tough cover
(maximum height: 250 mm).
Maximum feeder tray capacity for booklets with a weak cover (maximum
height: 150 mm).
Maximum feeder tray capacity for single sheets: minimum sheet quality:
80 gr/m2 (maximum height: 50 mm).
5
71