Table of Contents
Advertisement
4.
Tap the envelope button to fetch another envelope.
5.
Make sure that the insert position is correct. If not, repeat the steps for adjusting the
insert position.
Adjust the Envelope Insert Fingers
To verify that the position of the fingers is correct:
1.
Choose a job and tab [1x] (envelope only).
2.
Tap the 'Envelope stop position' button.
3.
Lift the unlocking lever A of the upper unit and pull up the upper unit.
4.
Tap the arrow to move to the next screen.
4
43
Advertisement
Table of Contents
Troubleshooting
