quadient DS-95i Manual page 37

Exit Settings
1. In Exit Settings the Fixed exit is selected by default.
2. Optionally tap the [Advanced] button to set the Advanced settings per job.
3. Tap [>].
Continue with Finish the job definition and start the
Switch the mail set thickness detection on and off
You can switch the mail set thickness detection to 'yes' (= on) or 'no' (= off). By default the
mail set thickness detection is set to 'yes'.
To change these settings:
1. Select the job that you want the change the mail set thickness detection setting for.
2. Tap [Edit].
3. Navigate to Exit settings.
If the job uses reading, you cannot switch on the Mail Set Thickness
Detection (DFC) for the document set. With reading, the document
set size can be different for every set.
job, or set the counter
4
settings.
33