quadient DS-95i Manual page 117

OMR advanced license
For the OMR advanced license the following functions are available:
• The basic functions (Start, Insert, Parity, Safety).
• Divert (Divert & Continue) - The set will be diverted and the system continues.
• Stop (Divert & Stop) - The set will be diverted and the system stops indicating error
(FT1-RE1-000 Reading stop - Stop mark read).
• Selective Feed (feeder 1-6 and the versaFeeder) - If the system reads the command,
an enclosure from the enclosure feeder is added to the set. This function is printed
on the last sheet of a set.
• Exit control - Determines if the envelope is transported to stacker or to the side exit.
• Present on deck - The set leaves the system from the upper unit. The system does
not stop processing. The envelope is not sealed.
• Present on deck and stop - The set leaves the system from the upper unit. The system
stops. The envelope is not sealed.
• Sealing control - Determines if envelopes are sealed or not. If a mark is printed, the
envelope is not sealed.
• Sequence Check - Sheets in a stack can accidentally get out of sequence or can be
missing. This can be detected by the sequence check. Each sheet has a binary code
that is a part of the reading code. Depending on the application one, two or three
marks are used by sequence check.
8
113