quadient DS-95i Manual page 44

Finish the Job Definition and Start the Job
When you have finished the exit settings, the touch screen shows an overview of the job
settings.
In this screen you can change the following settings:
• Move documents between feeders (see
• Link feeders (see
• Change the counter settings (see
4
When you are ready with these settings, proceed as follows:
1. Load the documents
2. Tap [1x] to create a test mail set (see
3. If desired, you can save the job (see
4. Tap [Start] to start the job.
40
Link feeder trays)
Change the counter
on page 57 as indicated on the Job info screen.
Test mail
Save a
Change to an other feeder
settings)
set).
job).
tray)