quadient DS-95i Manual page 122

7. Tap the [Reading] tab.
8. Select the code type [OMR].
9. Configure the location of the OMR marks by setting the offset of the top and left side
8
of the sheet.
10. Load a sample document in the feeder tray as indicated.
11. Tap [Verify] to read an example sheet to check the correct reading of the OMR marks.
12. If necessary adjust the position from top and from left side. Verify again with a sample
sheet.
13. Tap the information button to verify the read OMR marks.
14. Tap [OK] and follow the remaining steps to complete the job.
15. When you completed the job creation, tap [Save] to save job.
If required the maximum number of sheets can be reconfigured. Refer to
Settings for more details on how to change these settings.
118
Reading