Table of Contents
Advertisement
Envelope Hopper
When an envelope gets stuck in the envelope hopper, remove the envelope as follows:
1.
Pull down small lever B.
Pins C will come down.
2.
Push lever A to the right and hold it.
Pins C will go up.
10
3.
Remove the stuck envelope.
4.
Release lever A.
5.
Make sure the separation setting is still correct (see
6.
Return lever B.
7.
Tap [x] to reset the error and restart the job.
Exit, Sealing and Inserting Area
When a stoppage occurs in the exit, sealing and inserting area, remove the material as
follows:
1.
Lift the unlocking lever A of the upper unit and pull up the upper unit.
2.
Remove all material.
3.
Close the upper unit.
4.
Tap [x] to reset the error and restart the job.
132
Loading
Envelopes).
Advertisement
Table of Contents
Troubleshooting
