Table of Contents
Advertisement
5.
Follow the instructions on screen.
4
If the insert fingers are not correct, adjust the fingers as follows:
1.
Loosen the knurled knob C on top of each finger.
2.
Adjust each finger so that the tip enters about 5 mm (0.2 inch) into the envelope.
3.
Re-tighten the knurled knob.
The fingers can be moved sideways to the desired position.
4.
Place the outer fingers D about 5 to 10 mm (0.2 to 0.4 inch) from the edges of the
envelope.
5.
Tap the envelope button on the touch screen to fetch another envelope.
44
Check the position of the insert fingers when changing to a different
type of envelope.
Advertisement
Table of Contents
Troubleshooting
