3.
Tap the [on/off] button to set the Stop counter to 'on' or 'off'.
If you set the Stop counter to 'on' you can enter the 'Stop at value'. Enter a value from
5 through 9999.
4.
Tap the reset button for the Job total counter to set it to zero.
5.
Tap [OK] to go back to the job overview screen and tap [Start].
Be aware that when the system stops based on the stop counter,
there can still be documents in the system. To clear the system
from documents, remove the documents from the feeder trays and
tap [Start] from the warning message; the remaining documents
will be processed to clear the system.
If you set the Job total counter to zero the number history of this
job will be lost.
4
39