quadient DS-95i Manual page 113

Increased Reading Speed
To obtain an increased reading speed, resulting in a higher output, the following
requirements should be met:
• the reading marks / barcode should be printed between 7 mm and 85 mm measured
from the top of the sheet;
• do not use (selective) enclosures.
BCR license types
There are two BCR license types:
• Basic
• Advanced
BCR basic license
For the BCR basic license the following functions are available:
• Page N of M: as long as N is below M, the document set is not complete. As soon as
N=M, the set is complete and will be inserted into an envelope.
• Insert/Accumulate: defines when a document set is complete and must be inserted
into an envelope.
• Customer ID: BCR uses the Customer ID code to complete a set. If the ID changes,
the set is inserted. This is only possible with reverse reading (First of group).
At least one basic commands is required. Page N of M can be used in combination with
Customer ID as an integrity check.
8
109