Usa Conformance Standards - Extreme Networks ExtremeWireless AP3935e Installation Manual

• This device must accept any interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a residential and business
environment. This equipment generates, uses, and radiates radio frequency energy, and if not
installed and used in accordance with instructions, may cause harmful interference. However,
there is no guarantee that interference will not occur. If this equipment does cause harmful
interference, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the transmitting antenna.
• Increase the separation between the equipment or devices.
• Connect the equipment to an outlet other than the receiverʹs.
• Consult a dealer or an experienced radio/TV technician for suggestions.

USA Conformance Standards

This equipment meets the following conformance standards:
Safety
• UL 60950‐1
EMC
• FCC CFR 47 Part 15, Class B
Radio transceiver
• CFR 47 Part 15.247, Subpart C
• CFR 47 Part 15.407, Subpart E
Other
• IEEE 802.11ac (5 GHz)
• IEEE 802.11b/g (2.4 GHz)
• IEEE 802.11n
• IEEE 802.3at (PoE)
• IEEE 802.3af (PoE)
26 ExtremeWireless AP3935i and AP3935e