Table of Contents
Advertisement
Technical Data
2.4
If the sauna control device is installed in the technical room
The control device can be installed directly on the outer side of the cabin or at another
If the sauna
location, however not within the cabin. If the installation is not done directly on the outer
control device
wall of the cabin then the following points should be noted:
is not directly
installed on the
outer wall of the
cabin
Figure 1: Cabling while installing the sauna control device not directly on the outer wall of the cabin
12
Lay the signal cables separately from the power line.
Do not lay the signal cables parallel to the power line.
Install a distribution box for the signal lines and another one for the power lines as
per Figure 1
Note EN 60335-2-53 for remote start
Installation instructions Sauna control Series FCUxx00 / Version V 2.27
Advertisement
Table of Contents
