Table of Contents
Advertisement
Installation of
Installation opening of the flush mounted socket for installation of the internal display:
the double flush
mounted socket
Fig. 10: Mounting hole of the double flush mounted socket
Electrical
Connect the RJ45-connector of the internal display with a patch cable to the control
device.
Connection
Electrical
connection
diagram
Figure 11: Connection interior display
The electrical lines for FCU-EXT-INTERIOR-DISPLAY(-T) and FCU-DESIGN are
plugged on top of each other in the Double-RJ45-Connector. Which lines will be put up
or down does not matter. Both sockets are the same.
Installation instructions Sauna control Series FCUxx00 / Version V 2.27
1-2: Drill with box drill
3-4: Saw out the left standing center bars with a jigsaw
Installation
25
Advertisement
Table of Contents
