Step 9 - Install Keysight Io Libraries Suite (Not Required For M8100A-Bu6); Step 10 - Install M8070B Software (Not Required For M8100A-Bu6) - Keysight M8008A Getting Started Manual

2 Basic Setup for M8100A

Step 9 - Install Keysight IO Libraries Suite (not required for M8100A-BU6)

Step 10 - Install M8070B Software (not required for M8100A-BU6)

38
Contact your Keysight representative to replace or service the
chassis/module. See
page 47.
IO Libraries Suite version 17.1 or later is required. Always use the latest
version of the Keysight IO Libraries.
Perform this step if you are setting up an M8100A-BU5 system or the
NOTE
host computer you are using as part of the M8100A system requires I/O
library installation.
1 Disconnect any devices connected to the host computer.
2 If open, close all applications on the host computer.
3 Download and install the IO Libraries from
www.keysight.com/find/iosuite.
4 Follow the instructions as prompted during the installation.
5 After installation, you will see the Keysight IO icon in the taskbar
notification area of the host computer screen.
Perform this step if you are setting up an M8100A-BU5 system or an
NOTE
M8100A system in which the host computer requires I/O library
installation.
The M8070B software does not require any license for its installation.
However, it can only be used to perform some basic operations. For
advance operations, you need to install the driver packages in the M8070B
software. For details, go to
M8070B Software
Contacting Keysight Service and Support
Step 12 - Install Module Driver Package in the
on page 39.
Keysight M8100A Series Arbitrary Waveform Generators Getting Started Guide
on